Study on microstructure and high temperature oxidation resistance of laser cladding coating prepared by Ni60-TiO2-B4C-Al powders

被引：0
|
作者：
Zhou Fang [1 ]
Yang Huiyao [1 ]
He Lianghua [1 ]
机构：
[1] Guizhou Univ, Sch Met & Mat, Guiyang 550025, Guizhou, Peoples R China
来源：
MATERIALS SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2 | 2014年 / 488-489卷
关键词：
laser cladding; coating; microstructure; oxidation resistance; ALLOY; BEHAVIOR;
D O I：
10.4028/www.scientific.net/AMM.488-489.201
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The composite coating with TiC-TiB2-Ni3Al was fabricated on 45 steel by laser cladding. The microstructure and high temperature oxidation resistance of coating were investigated. The results show that, the main phases of coating are alpha-Fe, TiC, TiB2, Ni3Al, (Fe,Cr)(7)C-3 and Al2O3. The interface of coating and substrate material is metallurgical bond; the coating is uniform and dense without cracks and pores. The fine particles of TiC and TiB2 disperse uniformly in the coating. After oxidized at 1000 degrees C for 60 h, the oxidation film is consisted of spherical oxides of Al, Ti and Cr, they can hinder the diffusion between oxygen and metal atoms and make the coating possess outstanding high temperature oxidation resistance.
引用
收藏
页码：201 / 204
页数：4
相关论文
共 50 条
  • [21] Microstructure and thermal physical parameters of Ni60-Cr3C2 composite coating by laser cladding
    Chenggang Pan
    Huachang Wang
    Hongfu Wang
    Qingming Chang
    Huajun Wang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2010, 25 : 991 - 995
  • [22] Microstructure and Thermal Physical Parameters of Ni60-Cr3C2 Composite Coating by Laser Cladding
    潘成刚
    Journal of Wuhan University of Technology(Materials Science), 2010, 25 (06) : 991 - 995
  • [23] Microstructure and Oxidation Behavior of Ni–TiO2 Composite Coating at High Temperature
    Eisa Khoran
    Morteza Zandrahimi
    Hadi Ebrahimifar
    Oxidation of Metals, 2019, 91 : 177 - 189
  • [24] Microstructure and Oxidation Behavior of Ni-TiO2 Composite Coating at High Temperature
    Khoran, Eisa
    Zandrahimi, Morteza
    Ebrahimifar, Hadi
    OXIDATION OF METALS, 2019, 91 (1-2): : 177 - 189
  • [25] Microstructure and friction coefficient of ceramic (TiC, TiN and B4C) reinforced Ni-based coating by laser cladding
    Zhao, Yu
    Yu, Tianbiao
    Guan, Chuang
    Sun, Jiayu
    Tan, Xuefei
    CERAMICS INTERNATIONAL, 2019, 45 (16) : 20824 - 20836
  • [26] Microstructure and Wear Resistance of CeO2+Ni60A Composite Coating on Aluminum Alloys by Laser Cladding
    Zhang Guangyao
    Wang Chenglei
    Gao Yuan
    Wei Wenzhu
    Lu Xiaohui
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (05) : 1229 - 1233
  • [27] Microstructure and corrosion resistance of Al2CrFeCoCuNixTi high entropy alloy coatings prepared by laser cladding
    Qiu X.
    Wu M.
    Qi Y.
    Liu C.
    Zhang Y.
    Huang C.
    Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering, 2018, 47 (07):
  • [28] High-Temperature Oxidation Characteristics of Al2O3/CoNiCrAlY Coating Obtained via Laser Cladding
    Zhang Rui
    Ren Pan
    Yang Yingfei
    Yang Jiaoxi
    Zhou Shengfeng
    LASER & OPTOELECTRONICS PROGRESS, 2020, 57 (17)
  • [29] Microstructure and high temperature wear resistance of laser cladding NiCoCrAlY/ZrB2 coating
    Guo, C. (guochun@licp.cas.cn), 1600, Science Press (42):
  • [30] Study on high-temperature oxidation and hot corrosion characteristics of Cr60Ni40 laser cladding layer
    Chen, Shanshan
    Liu, Zongde
    Ning, Huaqing
    Liu, Fulai
    MATERIALS LETTERS, 2023, 342
12345