Principal strain-induced fiber orientation evolution in the Csf/Mg composites with a large deformation

被引:1
|
作者
Tian, Wenlong [1 ]
Qi, Lehua [1 ]
Zhou, Jiming [1 ]
Xu, Yiren [1 ]
机构
[1] Northwestern Polytech Univ, Sch Mech Engn, Xian 710072, Peoples R China
关键词
C-sf/Mg composites; extrusion; finite element analysis; fiber orientation evolution; principal strains; MATRIX COMPOSITES; REINFORCED COMPOSITES; SHEAR-FLOW; SUSPENSIONS; PREDICTION; MICROSTRUCTURE; PARTICLES; EXTRUSION; STIFFNESS; STRENGTH;
D O I
10.1177/0021998314561104
中图分类号
TB33 [复合材料];
学科分类号
摘要
In this article, the fiber orientation evolution in the C-sf/Mg composites with a large deformation is investigated. The principal strain-induced fiber orientation evolution mechanism, which states that the fiber orientation evolution in the C-sf/Mg composites with a large deformation is determined by the principal strains, is proposed. The fiber orientation distribution factors F-i (i = 1, 2 and 3) taking the form of the principal strains are proposed to quantitatively characterize the fiber orientation distribution in the C-sf/Mg composites. The fiber orientation factors F-i(s) predicted by the finite element simulation based on the principal strain-induced fiber orientation evolution mechanism are compared against those F-i(m) measured from the micrographs of the extrusion experiments of C-sf/Mg composites. The results demonstrate that the principal strain-induced fiber orientation evolution mechanism is valid and convenient to predict the fiber orientation evolution in the C-sf/Mg composites with a large deformation. In the extruded C-sf/Mg composites, the fibers are reoriented toward the direction of the maximum principal strain and deviated from the direction of the minimum principal strain.
引用
收藏
页码:3229 / 3240
页数:12
相关论文
共 50 条
  • [31] Strain-induced step bunching in orientation-controlled GaN on Si
    Narita, Tetsuo
    Iguchi, Hiroko
    Horibuchi, Kayo
    Otake, Nobuyuki
    Hoshi, Shinichi
    Tomita, Kazuyoshi
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2016, 55 (05)
  • [32] The effect of fiber orientation on the polymerization shrinkage strain of fiber-reinforced composites
    Tezvergil, A.
    Lassila, L. V. J.
    Vallittu, Px
    DENTAL MATERIALS, 2006, 22 (07) : 610 - 616
  • [33] Strain-induced crystallization in natural rubber: A model for the microstructural evolution
    Laghmach, R.
    Biben, T.
    Laghmach, R.
    Chazeau, L.
    Chenal, J. M.
    Munch, E.
    Gauthier, C.
    CONSTITUTIVE MODELS FOR RUBBER VIII, 2013, : 473 - 477
  • [34] Formation and evolution of strain-induced self-assembled dot
    Hanada, T
    Yao, T
    MICROELECTRONICS JOURNAL, 2005, 36 (3-6) : 216 - 218
  • [35] Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy
    Sun, H. Q.
    Shi, Y.-N.
    Zhang, M. A.
    Lu, K.
    ACTA MATERIALIA, 2007, 55 (03) : 975 - 982
  • [36] Thermomechanical Modeling of Microstructure Evolution Caused by Strain-Induced Crystallization
    Ayguen, Serhat
    Klinge, Sandra
    POLYMERS, 2020, 12 (11) : 1 - 30
  • [37] Influence of strain rate, temperature, and strain-induced martensite on residual stress evolution during tensile deformation of SS 304L
    Lavanya, S.
    Mahadevan, S.
    Naskar, Subhendu
    MATERIALS TODAY COMMUNICATIONS, 2025, 42
  • [38] The large-activation-energy analysis of strain-induced extinction
    Linan, Amable
    Vera, Marcos
    Sanchez, Antonio L.
    ANNUAL REVIEW OF FLUID MECHANICS, VOL 47, 2015, 47
  • [39] Strain-induced large injection current in twisted bilayer graphene
    Arora, Arpit
    Kong, Jian Feng
    Song, Justin C. W.
    PHYSICAL REVIEW B, 2021, 104 (24)
  • [40] Phase field approach for strain-induced magnetoelectric effect in multiferroic composites
    Ni, Y.
    Khachaturyan, A.G.
    Journal of Applied Physics, 2007, 102 (11):