Microstructure and Property of ZrO2 Joint Direct Brazed with Aluminum

被引：0
|
作者：
Qi, Xiaoben [1 ]
Ma, Bingyang [1 ]
Shang, Hailong [1 ]
Zhang, Rulin [1 ]
Lu, Jingke [1 ]
Fu, Jiabin [1 ]
Xu, Hao [1 ]
机构：
[1] Shanghai Dianji Univ, Sch Mat Engn, Shanghai 201306, Peoples R China
来源：
MATERIALS TRANSACTIONS | 2020年 / 61卷 / 07期
关键词：
ZrO2; ceramic; direct brazing; Al solder; joint strength; WETTABILITY; STRENGTH; METALS; COPPER;
D O I：
10.2320/matertrans.MT-M2020005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to realize direct brazing ZrO2 with Al, a kind of sputtering Ni/Al double layer on Al solder surface was used. Results showed that ZrO2 could directly brazed to Al solder with sputtering Ni/Al double layer without interface reaction. And then direct brazing was investigated with the change of brazing temperature. Microstructure and joint strength of brazing seam were analyzed. Results showed that joint strength of brazing seam increased from 68.6 MPa to 121.2MPa with the increasement of brazing temperature from 680 degrees C to 840 degrees C, when the brazing temperature increased up to 920 degrees C, the joint strength gradually increased to 122.6 MPa. With the joint strength enhancement of brazing seam, the fracture of the joint is gradually transferred from interface to the brazing seam.
引用
收藏
页码：1252 / 1257
页数：6
相关论文
共 50 条
  • [31] Brazeability, Microstructure, and Joint Characteristics of ZrO2/Ti-6Al-4V Brazed by Ag-Cu-Ti Filler Reinforced with Cerium Oxide Nanoparticles
    Sharma, Ashutosh
    Ahn, Byungmin
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2019, 2019
  • [32] THE INTERGRANULAR MICROSTRUCTURE OF A PARTIALLY STABILIZED ZRO2 MATERIAL
    WAHLBERG, G
    FALK, LKL
    DUNLOP, GL
    AXELSSON, KO
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1985, 4 (11) : 1353 - 1355
  • [33] THE INTERGRANULAR MICROSTRUCTURE OF A PARTIALLY STABILIZED ZRO2 MATERIAL
    WAHLBERG, G
    FALK, LKL
    AXELSSON, KO
    DUNLOP, GL
    ULTRAMICROSCOPY, 1984, 13 (04) : 427 - 428
  • [34] Microstructure and mechanical property of 2219 aluminum alloy crossing joint
    Kong, Xiang-Feng
    Lin, Tao
    Chen, Hua-Bin
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2010, 44 (SUPPL. 1): : 95 - 98
  • [35] Effects of pore connectivity and microstructure on mechanical performance of ZrO2 scaffolds and PMMA-infiltrated ZrO2 composites
    Wang, Feng
    Xiong, Yaoyang
    Ning, Congqin
    Sun, Jian
    Zeng, Yuping
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 728 : 189 - 195
  • [36] Microstructure Evolution of ZrO2 Particle During Manufacture of ZrO2 Thermal Barrier Coating by Laser Melt Injection
    Lin Shougang
    Guo Xixi
    Chen Hao
    Zhang Hang
    Lai Jing
    Liu Dejian
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2019, 46 (08):
  • [37] MICROSTRUCTURE OF MULLITE/ZrO2 AND MULLITE/Al2O3/ ZrO2 TOUGH CERAMIC COMPOSITES.
    Rincon, J.M.
    Dinger, T.R.
    Thomas, G.
    Moya, J.S.
    Osendi, M.I.
    1600, (35):
  • [38] Effects of pore connectivity and microstructure on mechanical performance of ZrO2 scaffolds and PMMA-infiltrated ZrO2 composites
    Ning, Congqin (cqning@mail.sic.ac.cn), 1600, Elsevier Ltd (728):
  • [39] Interfacial reaction behavior and mechanical characterization of ZrO2/TC4 joint brazed by Ag-Cu filler metal
    Dai, Xiangyu
    Cao, Jian
    Liu, Jiaqi
    Wang, Dong
    Feng, Jicai
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 646 : 182 - 189
  • [40] Microstructure evolution and mechanical properties of vacuum brazed ZrO2/Ti-6Al-4V joint utilizing a low-melting-point amorphous filler metal
    Liang, Yuzheng
    Kong, Jian
    Dong, Kewei
    Song, Xinxiang
    Liu, Xiangkui
    Zhu, Rui
    VACUUM, 2021, 192
12345