Modification of mechanical properties of friction stir welded Cu joint by additional liquid CO2 cooling

被引：61
作者：
Xu, Nan [1 ]
Ueji, Rintaro [1 ]
Morisada, Yoshiaki [1 ]
Fujii, Hidetoshi [1 ]
机构：
[1] Osaka Univ, Joining & Welding Res Inst, Ibaraki, Osaka 5670047, Japan
来源：
MATERIALS & DESIGN | 2014年 / 56卷
基金：
日本科学技术振兴机构;
关键词：
Friction stir welding; Copper; Rapid cooling; Microstructure; Mechanical properties; PURE COPPER JOINTS; MICROSTRUCTURAL EVOLUTION; ALUMINUM; METALS; ALLOY; DEFORMATION; PARAMETERS; BEHAVIOR;
D O I：
10.1016/j.matdes.2013.10.076
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A notable effect of the retained heat after the fiction stir welding (FSW) of Cu was studied by the application of additional liquid CO2 cooling. The adjustment of the welding parameters made it possible to conduct the FSW processes, but the cooling rate of the joint was not sufficiently changed due to the existence of the post-annealing effect. However, the accelerated cooling can reduce the post-annealing effect and provide an ultrafine grain structure with a high dislocation density in the stir zone, and a joint with mechanical properties better than the base metal level was achieved. Crown Copyright (C) 2013 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：20 / 25
页数：6
相关论文
共 31 条
  • [1] Andersson CG, 1999, P 2 S FRICT STIR WEL
  • [2] TEMPERATURE AND CONCENTRATION DEPENDENCE OF STACKING FAULT ENERGY IN CO-NI SYSTEM
    ERICSSON, T
    [J]. ACTA METALLURGICA, 1966, 14 (07): : 853 - &
  • [3] Friction stir welding of AISI 1080 steel using liquid CO2 for enhanced toughness and ductility
    Fujii, H.
    Chung, Y. D.
    Sun, Y. F.
    [J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (06) : 500 - 506
  • [4] Friction stir welding of carbon steels
    Fujii, Hidetoshi
    Cui, Ling
    Tsuji, Nobuhiro
    Maeda, Masakatsu
    Nakata, Kazuhiro
    Nogi, Kiyoshi
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 429 (1-2): : 50 - 57
  • [5] Microstructure and mechanical properties of friction stir welded pure Mo joints
    Fujii, Hidetoshi
    Sun, Yufeng
    Kato, Hideaki
    [J]. SCRIPTA MATERIALIA, 2011, 64 (07) : 657 - 660
  • [6] Investigation of welding parameter dependent microstructure and mechanical properties in friction stir welded pure Ti joints
    Fujii, Hidetoshi
    Sun, Yufeng
    Kato, Hideaki
    Nakata, Kazuhiro
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (15): : 3386 - 3391
  • [7] Influence of tool shoulder geometry on properties of friction stir welds in thin copper sheets
    Galvao, I.
    Leal, R. M.
    Rodrigues, D. M.
    Loureiro, A.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (02) : 129 - 135
  • [8] Prediction of mechanical properties in friction stir welds of pure copper
    Heidarzadeh, A.
    Saeid, T.
    [J]. MATERIALS & DESIGN, 2013, 52 : 1077 - 1087
  • [9] MECHANISM OF DEFORMATION AND DEVELOPMENT OF ROLLING TEXTURES IN POLYCRYSTALLINE FCC METALS .3. THE INFLUENCE OF SLIP INHOMOGENEITIES AND TWINNING
    HIRSCH, J
    LUCKE, K
    HATHERLY, M
    [J]. ACTA METALLURGICA, 1988, 36 (11): : 2905 - 2927
  • [10] Experimental study on Friction Stir Welding of copper metals
    Hwang, Y. M.
    Fan, P. L.
    Lin, C. H.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (12) : 1667 - 1672
1234