Thin Film Solid Oxide Fuel Cells Operating Below 600°C: A Review

被引:26
作者
Lee, Yoon Ho [1 ]
Chang, Ikwhang [2 ]
Cho, Gu Young [3 ]
Park, Joonho [3 ]
Yu, Wonjong [3 ]
Tanveer, Waqas Hassan [3 ]
Cha, Suk Won [3 ]
机构
[1] Univ Calif San Diego, 9500 Gilman Dr, San Diego, CA 92093 USA
[2] Wonkwang Univ, Dept Automot Engn, 460 Iksan Daero, Iksan Si 54538, Jeonrabuk Do, South Korea
[3] Seoul Natl Univ, Dept Mech & Aerosp Engn, 1 Gwanakro, Seoul 08826, South Korea
基金
新加坡国家研究基金会;
关键词
Solid oxide fuel cell; Thin film; Low temperature; Catalyst; Sputter; Atomic layer deposition; YTTRIA-STABILIZED-ZIRCONIA; ATOMIC LAYER DEPOSITION; PULSED-LASER DEPOSITION; NI-YSZ COMPOSITE; WIND TURBINE; ELECTROCHEMICAL PERFORMANCE; TEMPERATURE; ELECTROLYTE; MEMBRANES; MICROSTRUCTURE;
D O I
10.1007/s40684-018-0047-0
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Thin film solid oxide fuel cells (TF-SOFCs) are one of the promising portable power sources in terms of rapid on/off, compact system volume, and high power density. This paper reviews fabrications, and designs of TF-SOFCs operating the temperature range of 300-500 degrees C. The fabricating processes of both the electrolyte and the electrode via chemical vapor depositions and physical vapor depositions are discussed. The two platforms for designing TF-SOFCs are described: porous substrate and free-standing structures.
引用
收藏
页码:441 / 453
页数:13
相关论文
共 97 条
  • [1] System Dynamic Modelling of Three Different Wind Turbine Gearbox Designs under Transient Loading Conditions
    Al-Hamadani, Haider
    An, Taylan
    King, Matthew
    Long, Hui
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2017, 18 (11) : 1659 - 1668
  • [2] Three-Dimensional Nanostructured Bilayer Solid Oxide Fuel Cell with 1.3 W/cm2 at 450 °C
    An, Jihwan
    Kim, Young-Beom
    Park, Joonsuk
    Guer, Turgut M.
    Prinz, Fritz B.
    [J]. NANO LETTERS, 2013, 13 (09) : 4551 - 4555
  • [3] [Anonymous], 1999, HDB CHEM VAPOR DEPOS
  • [4] Evaluation of Energy Efficiency of Thermoelectric Generator with Two-Phase Thermo-Syphon Heat Pipes and Nano-Particle Fluids
    Atalay, Tahsin
    Koysal, Yavuz
    Ozdemir, Ali Ekber
    Ozbas, Engin
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2018, 5 (01) : 5 - 12
  • [5] Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells
    Bae, Kiho
    Jang, Dong Young
    Choi, Hyung Jong
    Kim, Donghwan
    Hong, Jongsup
    Kim, Byung-Kook
    Lee, Jong-Ho
    Son, Ji-Won
    Shim, Joon Hyung
    [J]. NATURE COMMUNICATIONS, 2017, 8
  • [6] High-Performance Protonic Ceramic Fuel Cells with Thin-Film Yttrium-Doped Barium Cerate-Zirconate Electrolytes on Compositionally Gradient Anodes
    Bae, Kiho
    Lee, Sewook
    Jang, Dong Young
    Kim, Hyun Joong
    Lee, Hunhyeong
    Shin, Dongwook
    Son, Ji-Won
    Shim, Joon Hyung
    [J]. ACS APPLIED MATERIALS & INTERFACES, 2016, 8 (14) : 9097 - 9103
  • [7] A Silicon-Based Nanothin Film Solid Oxide Fuel Cell Array with Edge Reinforced Support for Enhanced Thermal Mechanical Stability
    Baek, Jong Dae
    Yu, Chen-Chiang
    Su, Pei-Chen
    [J]. NANO LETTERS, 2016, 16 (04) : 2413 - 2417
  • [8] Socio-Economic Impact of Renewable Energy-Based Power System in Mountainous Villages of Nepal
    Bhandari, Binayak
    Lee, Kyung-Tae
    Chu, Won-Shik
    Lee, Caroline Sunyong
    Song, Chul-Ki
    Bhandari, Pratibha
    Ahn, Sung-Hoon
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2017, 4 (01) : 37 - 44
  • [9] Optimization of Hybrid Renewable Energy Power System for Remote Installations: Case Studies for Mountain and Island
    Bhandari, Binayak
    Ahn, Sung-Hoon
    Ahn, Tae-Bong
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2016, 17 (06) : 815 - 822
  • [10] Chang I., 2015, J VACUUM SCI TECHN A, V33