On the fatigue strength of uncoated and DLC coated 7075-T6 aluminum alloy

被引：38

作者：

Baragetti, S. ^{[1
,2
]}

Borzini, E. ^{[3
]}

Bozic, Z. ^{[4
]}

Arcieri, E., V ^{[2
]}

机构：

[1] Univ Bergamo, GITT Ctr Innovat Management & Technol Transfer, Via S Bernardino 72e, I-24122 Bergamo, Italy

[2] Univ Bergamo, Dept Management Informat & Prod Engn, Viale Marconi 5, I-24044 Dalmine, Italy

[3] Via Lagrange 26, I-28100 Novara, Italy

[4] Univ Zagreb, Fac Mech Engn & Nav Arch, I Lucica 5, Zagreb 10000, Croatia

来源：

ENGINEERING FAILURE ANALYSIS | 2019年 / 102卷

关键词：

Light alloys; 7075-T6; Rotating bending fatigue; PVD; DLC; DIAMOND-LIKE CARBON; MECHANICAL-PROPERTIES; TRIBOCORROSION BEHAVIOR; RECENT PROGRESS; AL; 7075-T6; COATINGS; FILMS; CORROSION; MICROSTRUCTURE; PERFORMANCE;

D O I：

10.1016/j.engfailanal.2019.04.035

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

7075-T6 aluminum alloy is widespread in aerospace and automotive applications thanks to its favorable strength-to-mass ratio. However, the mechanical properties of the alloy decrease when it is exposed to aggressive media and cyclic loading. The deposition of low temperature hard coatings such as Diamond-Like Carbon (DLC) Physical Vapor Deposition (PVD) coatings guarantees good tribological behavior and corrosion resistance without compromising the mechanical properties of the substrate. The influence of DLC PVD coating deposition on the fatigue strength of the alloy in air environment is here described.

引用

页码：219 / 225

页数：7

共 68 条

[1] Corrosion behavior of PVD-grown WC-(Ti1-xAlx)N films in a 3.5% NaCl solution [J].

Ahn, SH ;

Yoo, JH ;

Choi, YS ;

Kim, JG ;

Han, JG .

SURFACE & COATINGS TECHNOLOGY, 2003, 162 (2-3) :212-221

[2] Design and Optimization of Friction Stir Welding Tool [J].

Aissani, Mouloud ;

Gachi, Saliha ;

Boubenider, Fouad ;

Benkedda, Younes .

MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (11) :1199-1205

[3]

Arcieri Emanuele Vincenzo, 2018, Key Engineering Materials, V774, P1, DOI 10.4028/www.scientific.net/KEM.774.1

[4] Tribocorrosion behaviour of DLC-coated 316L stainless steel [J].

Azzi, M. ;

Paquette, M. ;

Szpunar, J. A. ;

Klemberg-Sapieha, J. E. ;

Martinu, L. .

WEAR, 2009, 267 (5-8) :860-866

[5] Study on dissimilar friction stir butt welding of AA7075-O and AA2024-T4 considering the manufacturing limitation [J].

Bahemmat, Pouya ;

Haghpanahi, Mohammad ;

Givi, Mohammad Kazem Besharati ;

Seighalani, Kambiz Reshad .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 59 (9-12) :939-953

[6]

Baragetti Sergio, 2017, Key Engineering Materials, V754, P3, DOI 10.4028/www.scientific.net/KEM.754.3

[7]

Baragetti Sergio, 2016, Key Engineering Materials, V713, P50, DOI 10.4028/www.scientific.net/KEM.713.50

[8]

Baragetti Sergio, 2015, Key Engineering Materials, V627, P81, DOI 10.4028/www.scientific.net/KEM.627.81

[9] Physical vapour deposition of diamond-like carbon coatings on a 7075-T6 substrate for corrosion protection at long and short fatigue lives [J].

Baragetti S. ;

Gerosa R. ;

Villa F. .

International Journal of Structural Integrity, 2017, 8 (05) :576-584

[10] Step loading corrosion fatigue testing of 7075-T6 WC/C coated specimens in air and methanol [J].

Baragetti, Sergio ;

Gerosa, Riccardo ;

Villa, Francesco .

ENGINEERING FRACTURE MECHANICS, 2016, 164 :106-116

← 1 2 3 4 5 6 7 →