In this paper, we propose, design and simulate a new double gate (DG) tunnel field effect transistor (TFET), using germanium (Ge) source, dual dielectric gate oxide, gate/drain underlap and a metal drain. The device is designed to address two important issues of a conventional TFET, that is, the poor ON current (I-ON) and the presence of ambipolar conduction. In the proposed device, the use of Ge material for the source region and a dual dielectric gate oxide enhances the I-ON significantly and employing metallic drain and a gate-drain underlap fully suppresses the ambipolarity conduction. This can be attributed to the formation of a Schottky barrier at channel/drain interface. Two-dimensional (2D) calibrated simulation studies have been performed using the commercial TCAD device simulator. The results have shown that the I-ON has improved by almost similar to 3 orders whereas ambipolar current is completely suppressed in the proposed device in comparison to the conventional DG-TFET. Further, it has been found that the proposed device has a subthreshold slope (SS) of 35 mV/dec, I-ON of similar to 2x10(-4) A/ mu m and the I-ON to I-OFF ratio (I-ON/I-OFF) of similar to 10(13). The proposed device performance can be improved further by optimizing various device parameters, like underlap length etc. A flow chart mentioning the key fabrication steps has also been proposed to fabricate the proposed device.
