Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond

This paper presents essential investigations on the feasibility of ductile mode machining of sintered tungsten carbide assisted by ultrasonic elliptical vibration cutting technology. It lays out the foundations toward efficient application of elliptical vibration cutting technology on tungsten carbide. Tungsten carbide is a crucial material for glass molding in the optics manufacturing industry. Its grain size and binder material have significant influence not only on the mechanical and chemical properties but also on the machining performance of tungsten carbide. In order to investigate the influence of material composition on tungsten carbide machining, a series of grooving and planing experiments were conducted utilizing single crystal diamond tools. The experimental results indicated that as compared to ordinary cutting where finished surface deteriorates seriously, ductile mode machining can be attained successfully by applying the elliptical vibration cutting technique. It was also clarified that the binder material, the grain size, cutting/vibration conditions as well as crystal orientation of the diamond tool have significant influence on the tool life and the machined surface quality. Based on these fundamental results, feasibility of micro/nano-scale fabrication on tungsten carbide is investigated. By applying amplitude control sculpturing method, where depth of cut is arbitrary changed by controlling the vibration amplitude while machining, ultra-precision textured grooves and a dimple pattern were successfully sculptured on tungsten carbide in ductile mode. (C) 2014 Elsevier B.V. All rights reserved.