PERFORMANCE ANALYSIS OF DOUBLE-LAYER MICROCHANNEL HEAT SINK WITH VARIOUS MICROCHANNEL SHAPES

被引：19

作者：

Kulkarni, Kishor ^{[1
]}

Khan, Aatif Ali ^{[1
]}

Kim, Kwang-Yong ^{[1
]}

机构：

[1] Inha Univ, Dept Mech Engn, 100 Inha Ro, Incheon 22212, South Korea

来源：

HEAT TRANSFER RESEARCH | 2018年 / 49卷 / 04期

关键词：

microchannel; liquid cooling; conjugate heat transfer; thermal-hydraulic performance; heat sink; thermal resistance; pressure drop; MULTIOBJECTIVE OPTIMIZATION; THERMAL PERFORMANCE; RECTANGULAR MICROCHANNELS; NUMERICAL-SIMULATION; FORCED-CONVECTION; LAMINAR-FLOW; FLUID-FLOW; DUCTS; RIBS;

D O I：

10.1615/HeatTransRes.2018018534

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The thermal hydraulic performance of a double-layer microchannel heat sink was analyzed with a variety of channel shapes using three-dimensional Navier-Stokes equations in a range of Reynolds numbers from 160 to 850. Parallel and counterflow arrangements of double-layer microchannels and seven cross-sectional shapes of microchannels (boot, diamond, hexagonal, pentagonal, rectangular, rectangular wedge, and triangular) were tested in this work. The temperature, Nusselt number, thermal resistance, and pumping power were obtained for each channel shape and arrangement using conjugate heat transfer analysis. Among the tested microchannel shapes, the rectangular wedge shape showed the best thermal performance with the lowest thermal resistance and also with the greatest pumping power. The counterflow arrangement showed better thermal performance with a similar pumping power than the parallel flow arrangement for all the channel shapes.

引用

页码：349 / 367

页数：19

共 48 条

[1] Numerical Investigation of Heat Transfer Enhancement in a Microchannel With Grooved Surfaces [J].

Abouali, O. ;

Baghernezhad, N. .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2010, 132 (04) :1-8

[2] Numerical simulation of heat transfer in simultaneously developing flows in parallel rectangular ducts [J].

Al-Bakhit, H ;

Fakheri, A .

APPLIED THERMAL ENGINEERING, 2006, 26 (5-6) :596-603

[3] Multiobjective Optimization of a Grooved Micro-Channel Heat Sink [J].

Ansari, Danish ;

Husain, Afzal ;

Kim, Kwang-Yong .

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2010, 33 (04) :767-776

[4] Optimization and Comparative Study on Oblique- and Rectangular-Fin Microchannel Heat Sinks [J].

Ansari, Danish ;

Husain, Afzal ;

Kim, Kwang-Yong .

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2010, 24 (04) :849-852

[5]

ANSYS CFX-15, 2014, SOLV THEOR GUID

[6] Pressure drop of fully-developed laminar flow in microchannels of arbitrary cross-section [J].

Bahrami, M. ;

Yovanovich, M. M. ;

Culham, J. R. .

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2006, 128 (05) :1036-1044

[7] Numerical simulation of fluid flow and heat transfer in a microchannel heat sink with offset fan-shaped reentrant cavities in sidewall [J].

Chai, Lei ;

Xia, Guodong ;

Zhou, Mingzheng ;

Li, Jian .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2011, 38 (05) :577-584

[8] Simulation of rapid thermal processing in a distributed computing environment [J].

Liu, J ;

Chen, YS .

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2000, 38 (02) :129-152

[9] Three-dimensional numerical simulation of heat and fluid flow in noncircular microchannel heat sinks [J].

Chen, Yongping ;

Zhang, Chengbin ;

Shi, Mingheng ;

Wu, Jiafeng .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (09) :917-920

[10] Numerical simulation of stacked microchannel heat sink with mixing-enhanced passive structure [J].

Cheng, Y. J. .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2007, 34 (03) :295-303

← 1 2 3 4 5 →