共 12 条
Ion beam irradiation and annealing effects on carbon nanotube dispersed polyimide thin films
被引:8
作者:
Kobayashi, T.
[1
]
Hirao, H.
[2
]
Suzuki, A.
[2
]
Terai, T.
[2
]
Meguro, T.
[1
]
机构:
[1] RIKEN, Inst Phys & Chem Res, Wako, Saitama 3510198, Japan
[2] Univ Tokyo, Dept Nucl Eng, Bunkyo Ku, Tokyo 1138656, Japan
关键词:
Carbon nanotubes;
Irradiation;
Polyimide;
annealing;
TRANSPARENT;
COMPOSITES;
COATINGS;
D O I:
10.1016/j.surfcoat.2009.02.039
中图分类号:
TB3 [工程材料学];
学科分类号:
0805 ;
080502 ;
摘要:
Carbon nanotube (CNT) dispersed polyimide films were prepared using an ultrasonic homogenizer and a spin coater. Ion irradiation followed by thermal annealing was performed in order to enhance the conductivity of the films. The samples were irradiated at room temperature with 20 keV nitrogen ions at fluences ranging from 10(13) to 10(16) cm(-2) and then annealed at 673 K for 10 min in vacuum. The resistance of the irradiated samples was increased for all the irradiation doses. However, after annealing, the resistance decreased in the cases of irradiation at fluences of 10(15) and 10(16) cm(-2). in the case of the sample irradiated at 10(15) cm(-2) particularly, the resistance after annealing was lower than that of the unirradiated sample. The effect of carbonization of the polyimide, as a result of the irradiation, and the recovery of defects by annealing, contributed to conductivity enhancement. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:2472 / 2475
页数:4
相关论文