Design methodology of a non-invasive sensor to measure the current of the output capacitor for a very fast non-linear control

被引：26

作者：

Huerta, Santa C. ^{[1
]}

Alou, P. ^{[1
]}

Oliver, J. A. ^{[1
]}

Garcia, O. ^{[1
]}

Cobos, J. A. ^{[1
]}

Abou-Alfotouh, A.

机构：

[1] Univ Politecn Madrid, Ctr Elect Ind, Madrid, Spain

来源：

APEC: 2009 IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1- 4 | 2009年

关键词：

D O I：

10.1109/APEC.2009.4802754

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The combination of non-linear control and linear control proposed in [1] has a very fast transient response (voltage step from I V to 1.5 V in 2 Its). In order to achieve this fast transient response the non-linear scheme is based on measuring the current of the output capacitor of a Buck converter. The design of this current sensor is complex due to parasitic effects such as component tolerances (bandwidth and dc gain of the Op-Amp), aging, temperature variation, etc. A design methodology for this current sensor is proposed regarding all these effects. The sensing circuit is designed to mirror the actual capacitor current with a trans-impedance amplifier by matching phase and scaling impedances of the RLC network (C, ESR and ESL of the output capacitor). The proposed methodology has been validated by means of a buck converter switching at 5 MHz. Experimental results validate that the current sensor behaves appropriately under voltage and load steps.

引用

页码：806 / +

页数：2

共 25 条

[1]

ABOUALFOTOUH A, P IEEE 2006 APPL POW

[2]

BARRADO A, P IEEE APPL POW EL C

[3]

BARRADO A, 2002, FAST TRANSIENT RESPO, P1599

[4]

BIEL D, P IEEE ISCAS 96

[5]

CHANGCHIEN SK, 2006, P C PESC06 JUN

[6]

COSTABEBER A, P C PESC 08

[7]

FENG G, P IEEE APPL POW EL C

[8]

Forghani-zadeh HP, 2002, 2002 45TH MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL II, CONFERENCE PROCEEDINGS, P577

[9]

GODER D, P HFPC POW CONV 1996

[10]

HAITAO H, 2006, P C PESC 06 JUN

← 1 2 3 →