Synthesis of amorphous Ti-Al alloys by mechanical alloying of elemental powders

被引：0

作者：

Zhang, JH ^{[1
]}

Huang, BY ^{[1
]}

He, YH ^{[1
]}

Zhou, KC ^{[1
]}

Liu, Y ^{[1
]}

机构：

[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2002年 / 12卷 / 04期

关键词：

Ti-Al alloy; mechanical alloying; amorphisation;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Blended elemental powders with the nominal compositions (mole fraction, %) of Ti54Al46, Ti52Al48 and Ti50Al50 were mechanically alloyed in a planetary ball milling system for up to 100h. The structure evolution in these powders was characterized by scanning electron microscope, X-ray diffraction and differential thermal analysis techniques. It was found that elemental powders were progressively transformed into nanocrystalline Ti(Al) supersaturated solid solution, then into amorphous phase. With increasing Al content, the formation of a fully Ti(Al) supersaturated solid solution and amorphous phase were accelerated, which are attributed to the fine grain size. And the grain size condition for formation of amorphous phase in this system is <16 nm.

引用

页码：610 / 614

页数：5

共 13 条

[1] Room temperature mechanical behavior of silicon-doped TiAl alloys with grain sizes in the nano- and submicron-range [J].

Bohn, R ;

Klassen, T ;

Bormann, R .

ACTA MATERIALIA, 2001, 49 (02) :299-311

[2] Structural defects and thermal stability of Ti(Al) solid solution obtained by mechanical alloying [J].

Fadeeva, VI ;

Leonov, AV ;

Szewczak, E ;

Matyja, H .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 242 (1-2) :230-234

[3]

FROES FH, 1995, MAT SCI ENG A-STRUCT, V192, P612, DOI 10.1016/0921-5093(94)03285-8

[4]

Li Xiao-Qiang, 2001, Chinese Journal of Nonferrous Metals, V11, P55

[5] Microstructural control and mechanical properties of dual-phase TiAl alloys [J].

Liu, CT ;

Maziasz, PJ .

INTERMETALLICS, 1998, 6 (7-8) :653-661

[6]

Murty BS, 1998, INT MATER REV, V43, P101, DOI 10.1179/095066098790105654

[7] Synthesis and characterization of a TiAl/Ti5Si3 composite with a submicrocrystalline structure [J].

Senkov, ON ;

Cavusoglu, M ;

Froes, FH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 300 (1-2) :85-93

[8] NANOSTRUCTURED TITANIUM ALUMINIDES [J].

SURYANARAYANA, C ;

FROES, FH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 (pt 1) :108-111

[9] STRUCTURAL EVOLUTION OF MECHANICALLY ALLOYED TI-AL ALLOYS [J].

SURYANARAYANA, C ;

CHEN, GH ;

FREFER, A ;

FORES, FH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 158 (01) :93-101

[10]

Suryanaryana C., 2001, PROGR MAT SCI, V46, P117

← 1 2 →