MICROSTRUCTURE EVOLUTION DURING FATIGUE LOADING OF BULK NANOSTRUCTURED ALLOY AL93FE3CR2TI2

被引：0
作者：
Chlupova, Alice [1 ]
Chlup, Zdenek [1 ]
Kubena, Ivo [1 ]
机构：
[1] IPM AS CR, Vvi, Brno, Czech Republic
来源：
NANOCON 2012, 4TH INTERNATIONAL CONFERENCE | 2012年
关键词：
Quasicrystalline Al Alloys; Microstructure; Mechanical Properties; Fatigue; Icosahedral Phase; MECHANICAL-PROPERTIES; POWDER;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The results of observation of the microstructure evolution during fatigue loading of the bulk nanostructured quasicrystalline Al alloy are presented. Feedstock powder with nominal composition of Al93Fe3Cr2Ti1 produced by gas atomization was hot extruded for powder compaction. The enhanced strengthening of the quasicrystalline nanostructured Al alloy is attributed to the microstructure refinement, formation of supersaturated solid solution, presence of reinforcing icosahedral quasicrystalline phase and work hardening caused by the deformation during extrusion. Good thermal stability is supported by presence of spherical quasicrystalline particles with different interior structure and sizes of up to 250 nm in the diameter. Low cycle fatigue stress-strain characteristics and microstructural evolution of the material were studied. For the microstructure observation the samples of material before and after fatigue loading the TEM and SEM microscopy was employed. The microstructure evolution caused by cyclic loading with positive mean stress was evaluated.
引用
收藏
页码：328 / 332
页数：5
相关论文
共 15 条
[1]   Microstructure and properties of extruded rapidly solidified AlCr4.7Fe1.1Si0.3 (at.%) alloys [J].
Cavojsky, Miroslav ;
Balog, Martin ;
Dvorak, Jiri ;
Illekova, Emilia ;
Svec, Peter ;
Krizik, Peter ;
Janickovic, Dusan ;
Simancik, Frantisek .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 549 :233-241
[2]   Bulk nanostructured aluminium alloy Al93Fe3Cr2Ti2:: Processing and characterisation [J].
Chlup, Z ;
Todd, I ;
Garcia-Escorial, A ;
Lieblich, M ;
Chlupová, A ;
O'Dwyer, JG .
THERMEC'2003, PTS 1-5, 2003, 426-4 :2417-2422
[3]  
CHLUP Z., 2004, NANO 04 C P, P249
[4]  
CHLUPOVA A., 2011, NANOCON 2011 C P, P1
[5]  
Chlupová A, 2010, NANOCON 2010, 2ND INTERNATIONAL CONFERENCE, P393
[6]   Nanoquasicrystalline Al-Fe-Cr-based alloys. Part II. Mechanical properties [J].
Galano, M. ;
Audebert, F. ;
Garcia Escorial, A. ;
Stone, I. C. ;
Cantor, B. .
ACTA MATERIALIA, 2009, 57 (17) :5120-5130
[7]   High-strength aluminum- and zirconium-based alloys containing nanoquasicrystalline particles [J].
Inoue, A ;
Kimura, HM ;
Zhang, T .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 294 :727-735
[8]  
Inoue A., 2001, J. Light Metals, V1, P31, DOI [10.1016/S1471-5317(00)00004-3, DOI 10.1016/S1471-5317(00)00004-3]
[9]   Gas-atomised aluminium alloy powders and their products: an update 1996-2001 [J].
Jones, H .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :104-111
[10]   Formation, microstructure and mechanical properties of Al-Fe base quasicrystalline alloys [J].
Kimura, HM ;
Sasamori, K ;
Inoue, A .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 294 :168-172
12