Investigation of Decarburization in Spring Steel Production Process - Part I: Experiments

被引：36

作者：

Li, Dejun ^{[1
]}

Anghelina, D. ^{[2
]}

Burzic, D. ^{[1
]}

Zamberger, J. ^{[3
]}

Kienreich, R. ^{[4
]}

Schifferl, H. ^{[5
]}

Krieger, W. ^{[2
]}

Kozeschnik, E. ^{[6
]}

机构：

[1] Leoben Forsch GmbH, Mat Ctr, A-8700 Leoben, Austria

[2] Univ Min & Met Leoben, Chair Met, A-8700 Leoben, Austria

[3] Styria Federn GmbH, A-8750 Judenburg, Austria

[4] Voestalpine Austria Draht GmbH, Walzwerk Donawitz, A-8792 St Peter Freienstein, Austria

[5] Voestalpine Stahl Donawitz GmbH & CoKG, A-8700 Leoben, Austria

[6] Vienna Univ Technol, Inst Mat Sci & Technol, A-1040 Vienna, Austria

来源：

STEEL RESEARCH INTERNATIONAL | 2009年 / 80卷 / 04期

关键词：

decarburization; oxidation; spring steel; LOW-CARBON-STEEL; INTERNAL OXIDATION; HIGH-TEMPERATURES; OXIDE-SCALE; INTERFACE; ALLOYS; GROWTH; STRIP;

D O I：

10.2374/SRI08SP069

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Decarburization and oxidation have considerable influence on the product properties of spring steels. The investigations in part I of this paper concentrate on the experimental determination of the influence of different thermal cycles on the decarburization process. With the thermo-mechanical simulator Gleeble 1500, the influence of different process parameters, such as the time between furnace reheating and hot rolling, the hot rolling temperature, finish rolling temperature, laying temperature, and the alpha ->gamma phase transformation temperature range, is systematically investigated. In part II of this paper [15], numerical simulation techniques are applied to simulate the decarburization behavior under the experimental conditions, which are described in the present part I.

引用

页码：298 / 303

页数：6

共 15 条

[1] Review of the high-temperature oxidation of iron and carbon steels in air or oxygen [J].