Novel electrically conductive composite filaments based on Ag/saturated polyester/polyvinyl butyral for 3D-printing circuits

被引：28
|
作者：
Lei, Zuomin [1 ]
Chen, Zhenxing [1 ,2 ,3 ]
Zhou, Yong [1 ]
Liu, Yi [1 ]
Xu, Jingyao [3 ]
Wang, Dan [1 ]
Shen, Yuqiu [1 ]
Feng, Wenchao [1 ]
Zhang, Zhuo [1 ]
Chen, Houfu [1 ]
机构：
[1] Sun Yat Sen Univ, Sch Chem Engn & Technol, Zhuhai 519082, Peoples R China
[2] Sun Yat Sen Univ, Key Lab Low Carbon Chem & Energy Conservat Guangd, Guangzhou 510275, Guangdong, Peoples R China
[3] Baise Univ, Sch Mat Sci & Engn, Baise 533000, Peoples R China
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2019年 / 180卷
关键词：
Polymer-matrix composites; Electrical properties; Thermal properties; Scanning electron microscopy; Film transition technique; FLAKY SILVER POWDERS; FABRICATION; THICKNESS; BLENDS; PLA;
D O I：
10.1016/j.compscitech.2019.05.003
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Novel composite filaments with high electrical conductivity and adhesion were fabricated through a film transition technique based on two-dimensional silver powders, saturated polyester (SP) and polyvinyl butyral (PVB). The film transition technique and flow-induced orientation in the flow field resulted in the two-dimensional silver powders in the Ag/SP/PVB composite filaments being well ordered, which helped in obtaining the low volume resistivity of the composite filaments. When the Ag loading was 55 wt%, the volume resistivity of the Ag/SP/PVB composite filaments decreased to 3.14 x 10(-4) Omega cm. In addition, the Ag/SP/PVB composite filaments possessed thermal stability up to 340 degrees C and microhardness beyond 18.30 HV0.2. The 3D-printed samples demonstrated good adhesion (<= level 2) to paper, PET and alumina ceramic substrates. Considering that a high electrical conductivity and adhesion can be obtained simultaneously, the Ag/SP/PVB composite filaments might be potential candidates for 3D-printing circuits in a rapid and green way.
引用
收藏
页码：44 / 50
页数：7
相关论文
共 50 条
  • [31] Developing a novel technique for the fabrication of PLA-graphite composite filaments using FDM 3D printing process
    Zerankeshi, Meysam Mohammadi
    Sayedain, Sayed Shahab
    Tavangarifard, Mobina
    Alizadeh, Reza
    CERAMICS INTERNATIONAL, 2022, 48 (21) : 31850 - 31858
  • [32] Novel luminescent PLA/MgAl2O4:Sm3+ composite filaments for 3D printing application
    Rimpongpisarn, Thanawat
    Wattanathana, Worawat
    Sukthavorn, Kankavee
    Nootsuwan, Nollapan
    Hanlumyuang, Yuranan
    Veranitisagul, Chatchai
    Laobuthee, Apirat
    MATERIALS LETTERS, 2019, 237 : 270 - 273
  • [33] Investigation on using graphite filler for 3D printing of flexible electrically conductive polymer by extrusion-based additive manufacturing
    Bajpai, Arpit
    Jain, Prashant Kumar
    POLYMER ENGINEERING AND SCIENCE, 2024, 64 (01): : 328 - 338
  • [34] Mechanical Characteristics Analysis of 3D-printing Novel Chiral Honeycomb Array Structures Based on Functional Principle and Constitutive Relationship
    Ruiyao Liu
    Guofeng Yao
    Zezhou Xu
    Xue Guo
    Jianyong Li
    Zhenglei Yu
    Ping Liang
    Zhihui Zhang
    Chunyang Han
    Journal of Bionic Engineering, 2023, 20 : 1917 - 1929
  • [35] Mechanical Characteristics Analysis of 3D-printing Novel Chiral Honeycomb Array Structures Based on Functional Principle and Constitutive Relationship
    Liu, Ruiyao
    Yao, Guofeng
    Xu, Zezhou
    Guo, Xue
    Li, Jianyong
    Yu, Zhenglei
    Liang, Ping
    Zhang, Zhihui
    Han, Chunyang
    JOURNAL OF BIONIC ENGINEERING, 2023, 20 (05) : 1917 - 1929
  • [36] Novel Approach for Processing and Fabricating PLA/MgTiO3 Composite Filaments in Biomedical 3D Printing with Enhanced Mechanical and Thermal Properties
    Kumar, P. Vicky
    Birru, Anil Kumar
    Muthu, Nelson
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
  • [37] Freeze-dried silver nanowire based resin formulation for vat photopolymerization 3D printing of stretchable and electrically conductive nanocomposites
    Tan, Khai Yang
    Poh, Wen Siong
    Endot, Nor Azam
    Khiew, Poi Sim
    Foo, Chuan Yi
    Lim, Hong Ngee
    ADDITIVE MANUFACTURING, 2025, 101
  • [38] Extrusion-based additive manufacturing of aluminium-filled ethylene vinyl acetate for electrically conductive 3D part printing
    Bajpai, Arpit
    Jain, Prashant Kumar
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,
  • [39] Solid-state shear milling method to prepare PA12/boron nitride thermal conductive composite powders and their selective laser sintering 3D-printing
    Yang, Lu
    Wang, Lequan
    Chen, Yinghong
    JOURNAL OF APPLIED POLYMER SCIENCE, 2020, 137 (23)
  • [40] Synergistic material extrusion 3D-printing using core-shell filaments containing polycarbonate-based material with different glass transition temperatures and viscosities
    Peng, Fang
    Vogt, Bryan D.
    Cakmak, Miko
    INTERNATIONAL POLYMER PROCESSING, 2022, 37 (04) : 406 - 414
12345