Novel electrically conductive composite filaments based on Ag/saturated polyester/polyvinyl butyral for 3D-printing circuits

被引：28
|
作者：
Lei, Zuomin [1 ]
Chen, Zhenxing [1 ,2 ,3 ]
Zhou, Yong [1 ]
Liu, Yi [1 ]
Xu, Jingyao [3 ]
Wang, Dan [1 ]
Shen, Yuqiu [1 ]
Feng, Wenchao [1 ]
Zhang, Zhuo [1 ]
Chen, Houfu [1 ]
机构：
[1] Sun Yat Sen Univ, Sch Chem Engn & Technol, Zhuhai 519082, Peoples R China
[2] Sun Yat Sen Univ, Key Lab Low Carbon Chem & Energy Conservat Guangd, Guangzhou 510275, Guangdong, Peoples R China
[3] Baise Univ, Sch Mat Sci & Engn, Baise 533000, Peoples R China
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2019年 / 180卷
关键词：
Polymer-matrix composites; Electrical properties; Thermal properties; Scanning electron microscopy; Film transition technique; FLAKY SILVER POWDERS; FABRICATION; THICKNESS; BLENDS; PLA;
D O I：
10.1016/j.compscitech.2019.05.003
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Novel composite filaments with high electrical conductivity and adhesion were fabricated through a film transition technique based on two-dimensional silver powders, saturated polyester (SP) and polyvinyl butyral (PVB). The film transition technique and flow-induced orientation in the flow field resulted in the two-dimensional silver powders in the Ag/SP/PVB composite filaments being well ordered, which helped in obtaining the low volume resistivity of the composite filaments. When the Ag loading was 55 wt%, the volume resistivity of the Ag/SP/PVB composite filaments decreased to 3.14 x 10(-4) Omega cm. In addition, the Ag/SP/PVB composite filaments possessed thermal stability up to 340 degrees C and microhardness beyond 18.30 HV0.2. The 3D-printed samples demonstrated good adhesion (<= level 2) to paper, PET and alumina ceramic substrates. Considering that a high electrical conductivity and adhesion can be obtained simultaneously, the Ag/SP/PVB composite filaments might be potential candidates for 3D-printing circuits in a rapid and green way.
引用
收藏
页码：44 / 50
页数：7
相关论文
共 50 条
  • [21] A novel smart disinfection system using 3D-printed and electrically conductive composite hydrogel
    Khan, Shaheryar A.
    Malik, Anjum Naeem
    Velioglu, Basak
    Gul, Seref
    Kavakli, Ibrahim Halil
    Lazoglu, Ismail
    EMERGENT MATERIALS, 2024, 8 (2) : 1171 - 1182
  • [22] EFFECT OF SOLUBLISING AIDS ON THE ENTRAPMENT OF LORATIDINE IN PRE-FABRICATED PVA FILAMENTS USED FOR FDM BASED 3D-PRINTING
    Mahmood, Faisal
    Hussain, Amjad
    Arshad, Muhammad Sohail
    Abbas, Nasir
    Irfan, Muhammad
    Qamar, Nadia
    Hussain, Fahad
    Ghori, Muhammad Usman
    ACTA POLONIAE PHARMACEUTICA, 2020, 77 (01): : 175 - 182
  • [23] Formulation and processing of novel conductive solution inks in continuous inkjet printing of 3-D electric circuits
    Mei, JF
    Lovell, MR
    Mickle, MH
    IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, 2005, 28 (03): : 265 - 273
  • [24] Numerical analysis of mechanical behavior of unidirectional thermoplastic-based carbon fiber composite for 3D-printing
    Panina, O. A.
    Nemov, A. S.
    Zobacheva, A. Yu.
    Kobykhno, I. A.
    Tolochko, O. V.
    Yadykin, V. K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 30 : 559 - 563
  • [25] A review of recent advances in bio-based polymer composite filaments for 3D printing
    Yigit, Nese Cakir
    Karagoz, Idris
    POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, 2023, 62 (09): : 1077 - 1095
  • [26] Application of electrospinning and 3D-printing based bilayer composite scaffold in the skull base reconstruction during transnasal surgery
    Zhu, Yiqian
    Liu, Xuezhe
    Zhang, Keyi
    EL-Newehy, Mohamed
    Abdulhameed, Meera Moydeen
    Mo, Xiumei
    Cao, Lei
    Wang, Yongfei
    COLLOIDS AND SURFACES B-BIOINTERFACES, 2025, 245
  • [27] Application of Ag@Cu Water-Based Nanomaterial Conductive Ink in 3D Printing
    Zhao, Chenfei
    Wang, Jun
    Zhang, Zhuoqing
    Qian, Bo
    3D PRINTING AND ADDITIVE MANUFACTURING, 2023, 10 (03) : 552 - 558
  • [28] Characterisation and manufacturing methods of material extrusion 3D printing composite filaments based on polylactide and nanohydroxyapatite
    Aniulis, Jakub
    Kryszak, Bartlomiej
    Grzymajlo, Michal
    Dudzik, Grzegorz
    Abramski, Krzysztof M.
    Szustakiewicz, Konrad
    ADDITIVE MANUFACTURING, 2024, 94
  • [29] A Novel Cryogenic Approach to 3D Printing Cytocompatible, Conductive, Hydrogel-Based Inks
    Naseri, Aida Shoushtari Zadeh
    Fay, Cormac
    Nattestad, Andrew
    Ryder, Gregory
    Sayyar, Sepidar
    Yue, Zhilian
    Liu, Xiao
    Officer, David L.
    Wallace, Gordon G.
    3D PRINTING AND ADDITIVE MANUFACTURING, 2024, 11 (02) : 447 - 459
  • [30] A Sr@Ag-based spatiotemporal and step-release scaffold against chronic osteomyelitis, fabricated by coaxial 3D-printing
    Wang, Jingyun
    Zhang, Qin
    Wang, Hetong
    Liu, Chunlin
    Jiang, Le
    Liu, Wanting
    Wu, Yixian
    Wang, Yifan
    Yan, Hao
    Lin, Jun
    Sun, Xiaodan
    BIOMATERIALS, 2025, 314
12345