Optical and electrical properties of indium tin oxide thin films sputter-deposited in working gas containing hydrogen without heat treatments

被引:22
|
作者
Luo, Suning [1 ,2 ]
Okada, Koichi [1 ]
Kohiki, Shigemi [1 ]
Tsutsui, Film [1 ]
Shimooka, Hirokazu [1 ]
Shoji, Fumiya [3 ]
机构
[1] Kyushu Inst Technol, Dept Mat Sci, Kitakyushu, Fukuoka 8048550, Japan
[2] Liaoning Inst Technol, Liaoning, Peoples R China
[3] Kyushu Kyoritsu Univ, Kitakyushu, Fukuoka 8048585, Japan
关键词
Hydrogen; Indium tin oxide; Optical transmittance; Carrier transport; TRANSPARENT CONDUCTING OXIDES; IN2O3; TEMPERATURE;
D O I
10.1016/j.matlet.2008.12.008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Polycrystalline thin films of indium tin oxide sputter-deposited in the working gas containing hydrogen of 0.3-1.5% exhibited transmittance of >= 80% for visible lights and blue-shift of >= 0.1 eV in the optical absorption energy. The film deposited in the gas containing hydrogen of 1% demonstrated almost flat temperature-dependent resistivity and the lowest resistivity of = 1.5 x 10(-4) Omega cm at room temperature. The carrier density showed an inverse V-shaped behavior with the maximum at the hydrogen concentration of 1%. The mobility stayed at almost constant below the hydrogen concentration of 1% and dropped rather rapidly above 1%. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:641 / 643
页数:3
相关论文
共 50 条
  • [41] Electrical and optical properties of doped indium tin oxide thin films for top emission organic light emission devices
    Jung, C. H.
    Kang, Y. K.
    Yoon, D. H.
    JOURNAL OF THE KOREAN CRYSTAL GROWTH AND CRYSTAL TECHNOLOGY, 2008, 18 (04): : 160 - 164
  • [42] Optical and electrical properties of co-sputtered amorphous transparent conducting zinc indium tin oxide thin films
    Saji, K. J.
    Jayaraj, M. K.
    THIN SOLID FILMS, 2008, 516 (18) : 6002 - 6007
  • [43] Grain-size effect on the electrical properties of nanocrystalline indium tin oxide thin films
    Lee, Jong Hoon
    Kim, Young Heon
    Ahn, Sang Jung
    Ha, Tae Hwan
    Kim, Hong Seung
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2015, 199 : 37 - 41
  • [44] Effects of Sulfur Concentration on Structural, Optical and Electrical Properties of Tin Oxide Thin Films Deposited by Spray Pyrolysis Technique
    El Hat, Abderrahim
    Rouchdi, Mustapha
    Hadri, Adil
    Nassiri, Chourouk
    Chafi, Fatima Zahra
    Fares, Boubker
    Laanab, Larbi
    Hassanain, Najem
    Labrim, Hicham
    Mzerd, Ahmed
    PROCEEDINGS OF 2016 INTERNATIONAL RENEWABLE & SUSTAINABLE ENERGY CONFERENCE (IRSEC' 16), 2016, : 195 - +
  • [45] Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices
    Gwamuri, Jephias
    Marikkannan, Murugesan
    Mayandi, Jeyanthinath
    Bowen, Patrick K.
    Pearce, Joshua M.
    MATERIALS, 2016, 9 (01)
  • [46] Reactive magnetron sputtering of indium tin oxide films on acrylics—Electrical resistivity and optical properties
    Jow-Lay Huang
    Yin-Tsan Jah
    Ching-Yun Chen
    Bao-Shun Yau
    Su-Shia Lin
    Journal of Materials Engineering and Performance, 2000, 9 : 424 - 427
  • [47] Orientation and thickness dependence of electrical and gas sensing properties in heteroepitaxial indium tin oxide films
    Yang, Myung
    Hong, Seong-Hyeon
    SENSORS AND ACTUATORS B-CHEMICAL, 2011, 160 (01) : 490 - 498
  • [48] The effect of thickness on the optical and electrical properties of Hf doped indium oxide thin films
    Zhang, Jiajia
    Yang, Pan
    Peng, Wei
    Dong, Helei
    Li, Lingxia
    VACUUM, 2023, 216
  • [49] Electrical and Optical Properties of Eu-Doped Indium Oxide Thin Films Deposited by Radio-Frequency Magnetron Sputtering
    Woo, Jong-Kwan
    Cho, Shinho
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2014, 14 (12) : 8982 - 8986
  • [50] Reactive magnetron sputtering of indium tin oxide films on acrylics - Electrical resistivity and optical properties
    Huang, JL
    Jah, YT
    Chen, CY
    Yau, BS
    Lin, SS
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2000, 9 (04) : 424 - 427