Influence of blank holding force on stretch flange forming of aluminum alloy

被引：5
|
作者：
Dewang, Yogesh [1 ]
Hora, M. S. [2 ]
Panthi, S. K. [3 ]
机构：
[1] Maulana Azad Natl Inst Technol, Dept Mech Engn, Bhopal 462051, India
[2] Maulana Azad Natl Inst Technol, Dept Civil Engn, Bhopal 462051, India
[3] Adv Mat Proc & Res Inst, Comp Simulat & Design Ctr, Bhopal 462064, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 4-5期
关键词：
Stretch flanging; blank holding force; finite element simulation; punch load; aluminum alloy; SIMULATION; SHEET;
D O I：
10.1016/j.matpr.2015.07.157
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of blank holding force on the stretch flanging process was investigated using finite element simulation and experimental analysis. Finite element model was used to study the effect of blank holding forces on punch load and forming kinematics. An aluminum alloy 5052 sheet of 0.5 mm thickness was employed for this work. Blank holding force has a great effect on punch load and significant influence on forming kinematics. Validation of FEM results were obtained by conducting experiments. A very good agreement was obtained between FEM simulation results in terms of punch load and final shape which shows the accuracy of present finite element model. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1934 / 1941
页数：8
相关论文
共 50 条
  • [41] Hot Stretch Forming of a titanium alloy component for aeronautic: mechanical and modeling
    Astarita, A.
    Armentani, E.
    Ceretti, E.
    Giorleo, L.
    Mastrilli, P.
    Paradiso, V.
    Scherillo, F.
    Squillace, A.
    Velotti, C.
    CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 647 - 656
  • [42] Bend forming of aluminum alloy integral panel: a review
    Zhang, Xiao-Xiao
    Li, Yong-Hua
    METALLURGICAL RESEARCH & TECHNOLOGY, 2023, 120 (06)
  • [43] Micro-forming of aluminum alloy by cold rolling
    Haga, Toshio
    Inoue, Kouta
    Harada, Hideto
    Nakamura, Ryoji
    PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 2010, : 41 - 44
  • [44] Investigation of 2024 aluminum alloy flange semi-solid thixoforging by changing cavity
    Du Zhi-ming
    Liu Jun
    Niu Jia-hong
    Zhao Wang-qi
    Cong Sen
    RESEARCH IN MATERIALS AND MANUFACTURING TECHNOLOGIES, PTS 1-3, 2014, 835-836 : 425 - 431
  • [45] Prediction of critical blank-holding force criterion to prevent wrinkles in axi-symmetric cup drawing
    Yoon, H
    Alexandrov, B
    Chung, K
    Dick, RE
    Kang, TJ
    PROGRESS ON ADVANCED MANUFACTURE FOR MICRO/NANO TECHNOLOGY 2005, PT 1 AND 2, 2006, 505-507 : 1273 - 1278
  • [46] The influence of warm forming conditions on the natural aging and springback of a 6016-T4 aluminum alloy
    Laurent, H.
    Simoes, V. M.
    Oliveira, M. C.
    Menezes, L. F.
    INTERNATIONAL DEEP DRAWING RESEARCH GROUP 37TH ANNUAL CONFERENCE, 2018, 418
  • [47] Effects of coating, holding force, stretching height, yield stress, and surface roughness on springback of steel in the V-stretch bending test
    Abdedaim, Imene
    Ouakdi, Elhadj
    Louahdi, Rachid
    Maati, Ahmed
    MATERIALS TESTING, 2022, 64 (05) : 678 - 689
  • [48] Forming defects in aluminum alloy hot stamping of side-door impact beam
    Zhou, Jing
    Wang, Bao-yu
    Lin, Jian-guo
    Fu, Lei
    Ma, Wen-yu
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (11) : 3611 - 3620
  • [49] Rigid-flexible coupling forming process for aluminum alloy automobile body panels
    Wang, Yao
    Lang, Lihui
    Sherkatghanad, Ehsan
    Nielsen, Karl Brian
    Li, Xiao Xing
    Sun, Zhi Ying
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (9-12) : 3905 - 3918
  • [50] Improved forming capability of 7075 aluminum alloy using electrically assisted electromagnetic forming
    Xiao, Ang
    Huang, Changqing
    Yan, Ziqin
    Cui, Xiaohui
    Wang, Shipeng
    MATERIALS CHARACTERIZATION, 2022, 183
12345