Influence of blank holding force on stretch flange forming of aluminum alloy

被引：5

作者：

Dewang, Yogesh ^{[1
]}

Hora, M. S. ^{[2
]}

Panthi, S. K. ^{[3
]}

机构：

[1] Maulana Azad Natl Inst Technol, Dept Mech Engn, Bhopal 462051, India

[2] Maulana Azad Natl Inst Technol, Dept Civil Engn, Bhopal 462051, India

[3] Adv Mat Proc & Res Inst, Comp Simulat & Design Ctr, Bhopal 462064, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 4-5期

关键词：

Stretch flanging; blank holding force; finite element simulation; punch load; aluminum alloy; SIMULATION; SHEET;

D O I：

10.1016/j.matpr.2015.07.157

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of blank holding force on the stretch flanging process was investigated using finite element simulation and experimental analysis. Finite element model was used to study the effect of blank holding forces on punch load and forming kinematics. An aluminum alloy 5052 sheet of 0.5 mm thickness was employed for this work. Blank holding force has a great effect on punch load and significant influence on forming kinematics. Validation of FEM results were obtained by conducting experiments. A very good agreement was obtained between FEM simulation results in terms of punch load and final shape which shows the accuracy of present finite element model. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：1934 / 1941

页数：8

共 50 条

[31] Research on the drive electromagnetic forming of aluminum alloy and parameter optimization
Huang, Lantao
Feng, Wenjing
Zeng, Jin
Ding, Zinan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (11-12) : 7101 - 7113
[32] Influence of cryogenic-vibration compound field on the residual stress and forming accuracy during aluminum alloy forming
Li, Cheng
Long, Jinchuan
Wang, Xinyun
Ning, Bo
Li, Desong
Feng, Gang
Deng, Lei
Tang, Xuefeng
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (02)
[33] Defect Analysis of Cup-shaped Aluminum Alloy Forgings with Flange
Dong, Hongbo
Wang, Gaochao
MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 349 - 354
[34] Analysis of Incremental Sheet Forming of Aluminum Alloy
Coman, Costel Catalin
Mazurchevici, Simona-Nicoleta
Carausu, Constantin
Nedelcu, Dumitru
MATERIALS, 2023, 16 (19)
[35] Investigation on the Crack and Thinning Behavior of Aluminum Alloy 5052 Sheet in Stretch Flanging Process
Kumar, Surendra
Ahmed, M.
Panthi, S. K.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2020, 20 (04) : 1212 - 1228
[36] Evaluation of springback under the effect of holding force and die radius in a stretch bending test
Ouakdi, E. H.
Louahdi, R.
Khirani, D.
Tabourot, L.
MATERIALS & DESIGN, 2012, 35 : 106 - 112
[37] Mechanisms and forming rules of large thin-walled aluminum alloy components in electromagnetic incremental forming
Yan, Si-liang
Li, Hong-wei
Li, Ping
Xue, Ke-min
PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 : 1306 - 1313
[38] Study on flange-constrained spinning process for hemispherical aluminum alloy part
Yu, Zhongqi
Zhao, Yixi
Du, Chenyang
Liu, Ruofan
Evsyukov, S. A.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 278
[39] Influence of out-of-plane stretch forming induced different strain paths on micro-texture evolution, slip system activity and Taylor factor distribution in Al-Li alloy
Rakshit, Rahul
Sarkar, Arnab
Panda, Sushanta Kumar
Mandal, Sumantra
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 830
[40] Forming of aluminum alloy friction pull plug welding and its influence on interfacial bonding behavior
Deng Y.
Cui L.
Wang D.-P.
Shao Z.
Zhao Y.-H.
Zhang L.-N.
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2023, 33 (09): : 2825 - 2838

← 1 2 3 4 5 →