Experimental Study on the High Speed Machining of Hardened Steel

被引：27

作者：

Begic-Hajdarevic, Derzija ^{[1
]}

Cekic, Ahmet ^{[1
]}

Kulenovic, Malik ^{[1
]}

机构：

[1] Univ Sarajevo, Fac Mech Engn, Sarajevo 71000, Bosnia & Herceg

来源：

24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013 | 2014年 / 69卷

关键词：

high speed machining; hardened steel; cutting parameters; surface roughness; SURFACE-ROUGHNESS;

D O I：

10.1016/j.proeng.2014.02.234

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

In the present paper, experimental study is made to investigate the effect of cutting parameters on surface roughness in dry high speed milling of hardened tool steel using two cutting tools (diameter of 20 and 40 mm). The cutting parameters considered include cutting speed and feed per tooth. Experiments are conducted in up-cut and down-cut milling. Based on the experimental data, the effect of tool diameter on the surface roughness is analyzed. The good surface roughness can be achieved in high speed machining of examined steel but rapidly tool wear is observed. (C) 2014 The Authors. Published by Elsevier Ltd.

引用

页码：291 / 295

页数：5

共 9 条

[1] The Effect of Surface Roughness of End-Mills on Optimal Cutting Performance for High-Speed Machining [J].

Chen, Chi-Hsiang ;

Wang, Yung-Cheng ;

Lee, Bean-Yin .

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2013, 59 (02) :124-134

[2] The influence of feed rate and cutting speed on the cutting forces, surface roughness and tool-chip contact length during face milling [J].

Korkut, I. ;

Donertas, M. A. .

MATERIALS & DESIGN, 2007, 28 (01) :308-312

[3]

Kulenovic M, 2007, ANNALS OF DAAAM FOR 2007 & PROCEEDINGS OF THE 18TH INTERNATIONAL DAAAM SYMPOSIUM, P411

[4]

Moufki A, 2002, METAL CUTTING AND HIGH SPEED MACHINING, P51

[5] Experimental investigation on the high-speed machining of hardened steel [J].

Quan, YM ;

Wang, CY ;

He, ZW .

ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 :339-343

[6]

Schulz H., 1996, HOCHGESCHWINDIGKEITS

[7] High speed machining of moulds and dies for net shape manufacture [J].

Urbanski, JP ;

Koshy, P ;

Dewes, RC ;

Aspinwall, DK .

MATERIALS & DESIGN, 2000, 21 (04) :395-402

[8] Machining Parameters Optimization in End Milling of Ti-6Al-4V [J].

Vijay, S. ;

Krishnaraj, V .

INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013), 2013, 64 :1079-1088

[9] Optimal machining parameters selection in high speed milling of hardened steels for injection moulds [J].

Vivancos, J ;

Luis, C ;

Costa, L ;

Ortíz, JA .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 :1505-1512

← 1 →