Solid-state reactive sintering of transparent polycrystalline Nd:YAG ceramics

被引:196
作者
Lee, Sang-Ho [1 ]
Kochawattana, Sujarinee
Messing, Gary L.
Dumm, John Q.
Quarles, Gregory
Castillo, Vida
机构
[1] Penn State Univ, Dept Mat Sci & Engn, University Pk, PA 16802 USA
[2] Penn State Univ, Mat Res Inst, University Pk, PA 16802 USA
[3] II VI Inc, Saxonburg, PA 16056 USA
[4] VLOC Inc, II VI Inc, New Port Richey, FL 34655 USA
关键词
D O I
10.1111/j.1551-2916.2006.01051.x
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Transparent polycrystalline Nd:YAG ceramics were fabricated by solid-state reactive sintering a mixture of commercial Al2O3, Y2O3, and Nd2O3 powders. The powders were mixed in methanol and doped with 0.5 wt% tetraethoxysilane (TEOS), dried, and pressed. Pressed samples were sintered from 1700 degrees to 1850 degrees C in vacuum without calcination. Transparent fully dense samples with average grain sizes of similar to 50 mu m were obtained at 1800 degrees C for all Nd2O3 levels studied (0, 1, 3, and 5 at.%). The sintering temperature was little affected by Nd concentration, but SiO2 doping lowered the sintering temperature by similar to 100 degrees C. Abnormal grain growth was frequently observed in samples sintered at 1850 degrees C. The Nd concentration was determined by energy-dispersive spectroscopy to be uniform throughout the samples. The in-line transmittance was > 80% in the 350-900 nm range regardless of the Nd concentration. The best 1 at.% Nd:YAG ceramics (2 mm thick) achieved 84% transmittance, which is equivalent to 0.9 at.% Nd:YAG single crystals grown by the Czochralski method.
引用
收藏
页码:1945 / 1950
页数:6
相关论文
共 24 条
  • [1] DEWITH G, 1984, MATER RES BULL, V19, P1669, DOI 10.1016/0025-5408(84)90245-9
  • [2] Processing technology, laser, optical and thermal properties of ceramic laser gain materials
    Dubinskii, M
    Merkle, LD
    Goff, JR
    Quarles, GJ
    Castillo, VK
    Schepler, KL
    Zelmon, D
    Guha, S
    Gonzalez, LP
    Rickey, MR
    Lee, JJ
    Hegde, SM
    Dumm, JQ
    Messing, GL
    Lee, SH
    [J]. Laser Source and System Technology for Defense and Security, 2005, 5792 : 1 - 9
  • [3] POLYCRYSTALLINE CERAMIC LASERS
    GRESKOVICH, C
    CHERNOCH, JP
    [J]. JOURNAL OF APPLIED PHYSICS, 1973, 44 (10) : 4599 - 4606
  • [4] GRESKOVICH CD, 1972, AM CERAM SOC BULL, V51, P324
  • [5] Synthesis and luminescent properties of nano-sized Y3Al5O12:Eu3+ phosphors
    Hsu, WT
    Wu, WH
    Lu, CH
    [J]. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2003, 104 (1-2): : 40 - 44
  • [6] Ikesue A, 1997, J AM CERAM SOC, V80, P1517, DOI 10.1111/j.1151-2916.1997.tb03011.x
  • [7] FABRICATION AND OPTICAL-PROPERTIES OF HIGH-PERFORMANCE POLYCRYSTALLINE ND-YAG CERAMICS FOR SOLID-STATE LASERS
    IKESUE, A
    KINOSHITA, T
    KAMATA, K
    YOSHIDA, K
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1995, 78 (04) : 1033 - 1040
  • [8] FABRICATION OF POLYCRYSTALLINE, TRANSPARENT YAG CERAMICS BY A SOLID-STATE REACTION METHOD
    IKESUE, A
    FURUSATO, I
    KAMATA, K
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1995, 78 (01) : 225 - 228
  • [9] Growth of neodymium doped Y3Al5O12 single crystals by double crucible method
    Katsurayama, M
    Anzai, Y
    Sugiyama, A
    Koike, M
    Kato, Y
    [J]. JOURNAL OF CRYSTAL GROWTH, 2001, 229 (01) : 193 - 198
  • [10] GRAIN GROWTH IN POROUS COMPACTS
    KINGERY, WD
    FRANCOIS, B
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1965, 48 (10) : 546 - &