Numerical Analysis of Shot Peening Parameters for Fatigue Life Improvement

被引：2

作者：

Isa, M. R. ^{[1
]}

Zaroog, O. S. ^{[1
]}

Raj, P. ^{[1
]}

Sulaiman, S. N. ^{[2
]}

Abu Shah, I ^{[2
]}

Ismail, I. N. ^{[1
]}

Zahari, N. M. ^{[3
]}

Roslan, M. E. ^{[1
]}

Mohamed, H. ^{[1
]}

机构：

[1] Univ Tenaga Nas, Dept Mech Engn, Jalan IKRAM Uniten, Kajang 43000, Selangor, Malaysia

[2] Univ Teknikal Malaysia Melaka, Fac Engn Technol, Hang Tuah Jaya, Melaka, Malaysia

[3] Univ Tenaga Nas, Dept Civil Engn, Jalan IKRAM Uniten, Kajang 43000, Selangor, Malaysia

来源：

GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS | 2018年 / 2030卷

关键词：

D O I：

10.1063/1.5066858

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

This study will focus on finding the best parameters for shot peening process on aluminium alloy 2024-T351. The main parameters of shot peening process is shot material, velocity, number of impact and also the angle. Strain and work hardening is allowed on the target material. The simulation method was performed using ABAQUS 6.11. Simulation was run by applying shots on the aluminum alloy with variable velocity, number of impact as well as the angle of impact. Result shows that by increasing the velocity and the number of impact, the compressive residual stress will significantly increase. The result from the angle simulation shows that the highest impact is caused by an angle of 90 degrees.

引用

页数：5

共 11 条

[1] Bhuvaraghan Baskaran., 2010, International Journal of Structural Changes in Solids - Mechanics and Applications, V2, P33
[2] Simulation of shot peening: From process parameters to residual stress fields in a structure
Gallitelli, Donato
Boyer, Vincent
Gelineau, Maxime
Colaitis, Yann
Rouhaud, Emmanuelle
Retraint, Delphine
Kubler, Regis
Desvignes, Marc
Barrallier, Laurent
[J]. COMPTES RENDUS MECANIQUE, 2016, 344 (4-5): : 355 - 374
[3] Lesuer D., 1999, Experimental investigation of material models for Ti-6Al-4V and 2024-T3, DOI 10.2172/11977
[4] FEM and BEM analysis and modelling of residual stresses - A bibliography (1998-1999)
Mackerle, J
[J]. FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2001, 37 (03) : 253 - 262
[5] Ogawa K., 1994, T JAPAN SOC MECH E C, V60, P1120, DOI [10.1299/kikaic.60.1120, DOI 10.1299/KIKAIC.60.1120]
[6] Purohit R, 2017, MATER TODAY-PROC, V4, P2119, DOI 10.1016/j.matpr.2017.02.058
[7] Rouhaud E., 2005, HDB RESIDUAL STRESS
[8] Segurado E., 2018, EFFECTS LOW INTENSIT
[9] White F M., 2008, Fluid Mechanics
[10] Yuki K., 2014, J MECH ENG AUTOM, V4, P83

← 1 2 →