Finite Element Analysis of Residual Welding Stresses and Deformation for a 5A06 Aluminum Alloy Plate

被引：9
作者：
Lu, N. C. [1 ]
Wang, M. H. [1 ]
Hao, G. D. [2 ]
Wang, Y. T. [3 ]
机构：
[1] Shenyang Ligong Univ, Sch Mat Engn, Shenyang, Peoples R China
[2] Mudanjiang Normal Coll, Dept Chem, Mudanjiang, Peoples R China
[3] Liaoning Tech Univ, Coll Mech Engn, Fuxing, Peoples R China
来源：
STRENGTH OF MATERIALS | 2020年 / 52卷 / 04期
基金：
中国国家自然科学基金;
关键词：
finite element analysis; ANSYS; residual stress; residual deformation;
D O I：
10.1007/s11223-020-00204-8
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The residual stresses and deformation, in terms of the thermoelastoplastic theory, were simulated with the finite element method using ANSYS 13.0 software for a 5A06 aluminum alloy plate after welding. The butt joint thickness of the plate was 6 mm. A 3D thermomechanical model of the plate was constructed. The dimensions and distribution of residual stresses in the welded structure should be analyzed after simulation. Appropriate welding technologies were chosen to control welding residual stresses and deformation. The efficient production of an aluminum alloy for the welded structures will be provided.
引用
收藏
页码：532 / 538
页数：7
相关论文
共 12 条
  • [1] [Anonymous], 2003, P 4 INT S FRICT STIR
  • [2] Fang H. Y., 2011, WELDING STRUCTURE, P64
  • [3] Analytical modeling and numerical simulation for three-roll bending forming of sheet metal
    Fu, Zemin
    Tian, Xiuli
    Chen, Wei
    Hu, Bingkun
    Yao, Xingyan
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (5-8) : 1639 - 1647
  • [4] Development of Finite Element Analysis Method for Three-Dimensional Hot Bending and Direct Quench (3DQ) Process
    Kubota, Hiroaki
    Tomizawa, Atsushi
    Yamamoto, Kenji
    Okada, Nobuhiro
    [J]. 11TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES (NUMIFORM 2013), 2013, 1532 : 568 - 573
  • [5] [吕念春 Lu Nianchun], 2004, [材料科学与工艺, Material Science and Technology], V12, P317
  • [6] Effect of weld characteristics on the formability of welded tubes in NC bending process
    Ren, Ning
    Yang, He
    Zhan, Mei
    Zhang, Zhi-Yong
    Jiang, Hao-Min
    Diao, Ke-Shan
    Chen, Xin-Ping
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (1-4) : 181 - 195
  • [7] Welding Society of Chinese Mechanical Engineering Society, 2006, WELDING HDB, P132
  • [8] Wenjie Qin, 2015, Key Engineering Materials, V626, P149, DOI 10.4028/www.scientific.net/KEM.626.149
  • [9] Yan DJ., 2010, T CHINA, V45, P123
  • [10] Yin J, 2009, PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, VOL 1, P9, DOI 10.1115/MSEC2009-84374
12