Spherical nanostructured Si/C composite prepared by spray drying technique for lithium ion batteries anode

被引:49
作者
Chen, Libao
Xie, Xiaohua
Wang, Baofeng
Wang, Ke
Xie, Jingying [1 ]
机构
[1] Chinese Acad Sci, Shanghai Inst Microsyst & Informat Technol, Energy Sci & Technol Lab, Shanghai 200050, Peoples R China
[2] Chinese Acad Sci, Grad Sch, Beijing 100049, Peoples R China
[3] Shanghai Jiao Tong Univ, Dept Chem Engn, Shanghai 200240, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY | 2006年 / 131卷 / 1-3期
关键词
Si/C composite; spherical; nanostructure; spray drying technique; lithium ion battery; anode;
D O I
10.1016/j.mseb.2006.04.029
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Spherical nanostructured Si/C composite was prepared by spray drying technique, followed by heat treatment, in which nanosized silicon and fine graphite particles were homogeneously embedded in carbon matrix pyrolyzed by phenol formaldehyde resin. Cyclic voltammetry tests showed two pairs of redox peaks corresponding to lithiation and delithiation of Si/C composite. The Si/C composite exhibited a reversible capacity of 635 mAh g(-1) and good cycle performance used in. lithium ion batteries. To improve cycle performance of this Si/C composite further, the carbon-coated Si/C composite was synthesized by the second spray drying and heat treatment processing. The cycle performance of carbon-coated Si/C composite was improved significantly, which was attributed to the formation of stable SEI passivation layers on the outer surface of carbon shell which protected the bared silicon from exposing to electrolyte directly. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:186 / 190
页数:5
相关论文
共 23 条
  • [1] CHEN Y, 2004, ELECTROCHIM ACTA, V50, P435
  • [2] Effects of post-treatments on the performance of hard carbons in lithium cells
    Chevallier, F
    Gautier, S
    Salvetat, JP
    Clinard, C
    Frackowiak, E
    Rouzaud, JN
    Béguin, F
    [J]. JOURNAL OF POWER SOURCES, 2001, 97-8 : 143 - 145
  • [3] Mixed silicon-graphite composites as anode material for lithium ion batteries influence of preparation conditions on the properties of the material
    Dimov, N
    Kugino, S
    Yoshio, A
    [J]. JOURNAL OF POWER SOURCES, 2004, 136 (01) : 108 - 114
  • [4] Hasegawa T, 2004, CARBON, V42, P2573, DOI [10.1016/j.carbon.2004.05.050, 10.1016/j.carbon.2004.050.50]
  • [5] Lithium Insertion in SiAg Powders Produced by Mechanical Alloying
    Hwang, Sung-Min
    Lee, Heon-Young
    Jang, Serk-Won
    Lee, Sung-Man
    Lee, Seung-Joo
    Baik, Hong-Koo
    Lee, Jai-Young
    [J]. ELECTROCHEMICAL AND SOLID STATE LETTERS, 2001, 4 (07) : A97 - A100
  • [6] JUNG H, 2005, J POWER SOURCES, V115, P346
  • [7] Kim I, 2000, ELECTROCHEM SOLID ST, V3, P493
  • [8] Nanostructured Si/TiB2 composite anodes for Li-ion batteries
    Kim, I
    Blomgren, GE
    Kumta, PN
    [J]. ELECTROCHEMICAL AND SOLID STATE LETTERS, 2003, 6 (08) : A157 - A161
  • [9] Graphite-FeSi alloy composites as anode materials for rechargeable lithium batteries
    Lee, HY
    Lee, SM
    [J]. JOURNAL OF POWER SOURCES, 2002, 112 (02) : 649 - 654
  • [10] A high capacity nano-Si composite anode material for lithium rechargeable batteries
    Li, H
    Huang, XJ
    Chen, LQ
    Wu, ZG
    Liang, Y
    [J]. ELECTROCHEMICAL AND SOLID STATE LETTERS, 1999, 2 (11) : 547 - 549