Recyclability of Polyethylene/Polypropylene Binary Blends and Enhancement of Their Mechanical Properties by Reinforcement with Glass Fiber

被引：16

作者：

Kuram, Emel ^{[1
]}

Sahin, Zeynep Munteha ^{[2
]}

Ozcelik, Babur ^{[1
]}

Yilmaz, Faruk ^{[2
]}

Medar, Mehmet Metin ^{[1
]}

机构：

[1] Gebze Inst Technol, Dept Mech Engn, TR-41400 Gebze, Turkey

[2] Gebze Inst Technol, Dept Chem, TR-41400 Gebze, Turkey

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2014年 / 53卷 / 10期

关键词：

Injection molding; Mechanical properties; Polymer blends; PP; PE; Recycling; DENSITY POLYETHYLENE BLENDS; RECYCLED POLYPROPYLENE; COMPOSITES; VIRGIN; COPOLYMER; DEGRADATION; PARAMETERS; MORPHOLOGY; BEHAVIOR; HDPE;

D O I：

10.1080/03602559.2014.886066

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

In this work, glass-fiber-reinforced and unreinforced polypropylene-polyethylene blends were obtained to examine the effects of recycling process on the mechanical and chemical properties. Tensile strength, flexural strength, izod impact strength, and melt flow index tests were applied to test specimens. After recycling process, the mechanical properties of both glass-fiber-reinforced and unreinforced polypropylene-polyethylene blends declined. Decrease of the mechanical properties of the recycled blends was supported by scanning electron microscopy morphologies revealed separation and degradation in matrix phase. It was observed that adding glass fiber in polypropylene-polyethylene led to the improvement in mechanical properties except impact strength.

引用

页码：1035 / 1046

页数：12

共 44 条

[31] Investigating the Effects of Injection Molding Parameters on the Mechanical Properties of Recycled Plastic Parts Using the Taguchi Method [J].

Mehat, Nik Mizamzul ;

Kamaruddin, Shahrul .

MATERIALS AND MANUFACTURING PROCESSES, 2011, 26 (02) :202-209

[32] Thermo-mechanical characteristics of thermally aged polyethylene/polypropylene blends [J].

Mourad, Abdel-Hamid I. .

MATERIALS & DESIGN, 2010, 31 (02) :918-929

[33] Preparation and Properties of Wood Plastic Composites Made of Recycled High-density Polyethylene [J].

Nourbakhsh, Amir ;

Ashori, Alireza .

JOURNAL OF COMPOSITE MATERIALS, 2009, 43 (08) :877-883

[34]

Radonjic G, 2002, MACROMOL MATER ENG, V287, P122, DOI 10.1002/1439-2054(20020201)287:2<122::AID-MAME122>3.0.CO

[35]

2-A

[36] Effect of Sodium Bicarbonate on the Mechanical and Degradation Properties of Short Jute Fiber Reinforced Polypropylene Composite by Extrusion Technique [J].

Roy, Juganta K. ;

Khan, Ruhul A. ;

Hossain, K. M. Zakir ;

Khan, Mubarak A. ;

Mistry, Sabyasachy ;

Chowdhury, A. M. Sarwaruddin .

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS, 2012, 61 (08) :571-586

[37] Improvements of the Tensile Properties of Recycled High Density Polyethylene (HDPE) by the Use of Carbonized Olive Solid Waste [J].

Sawalha, Shadi ;

El-Hamouz, Amer .

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (04) :387-393

[38] Influence of reprocessing on the mechanical properties and structure of polyamide 6 [J].

Su, Kuan-Hua ;

Lin, Jia-Horng ;

Lin, Chih-Ching .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 192 :532-538

[39] Recycled High Density Polyethylene/Natural Rubber/Chicken Feather Fibers (RHDPE/NR/CFF) Composites: The Effect of Fiber Loading and Benzyl Urea [J].

Supri, A. G. ;

Ismail, H. .

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2013, 52 (13) :1316-1322

[40] Impact behaviour of polypropylene/polyethylene blends [J].

Tai, CM ;

Li, RKY ;

Ng, CN .

POLYMER TESTING, 2000, 19 (02) :143-154

← 1 2 3 4 5 →