Influence of high-temperature curing on the properties of the concrete containing ground iron and steel slag

被引：2

作者：

Li Mengyuan ^{[1
]}

Hu Jin ^{[1
]}

机构：

[1] Tsinghua Univ, Dept Civil Engn, Beijing 100084, Peoples R China

来源：

SUSTAINABLE DEVELOPMENT OF URBAN AND RURAL AREAS | 2014年 / 507卷

关键词：

steel slag; ground granulated blast furnace slag; ground iron and steel slag; high temperature curing; CEMENTITIOUS PROPERTIES; MECHANICAL-PROPERTIES; BLENDED CEMENTS; HYDRATION;

D O I：

10.4028/www.scientific.net/AMM.507.337

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The influence of high-temperature curing on the compressive strength and chloride permeability of the concrete containing ground iron and steel slag (GISS) was investigated. Under standard curing condition (20 degrees C), the early-age compressive strength of the concrete with GISS is much lower than that of the pure cement concrete. The activity of GISS is more sensitive to the increase of curing temperature than that of cement. The increase amplitude of early-age strength of the concrete with GISS is much greater than that of the pure cement concrete by increasing curing temperature. Increasing curing temperature tends to decease the late-age strength and enhance the late-age permeability of concrete. The negative effect of increasing curing temperature on the late-age properties of the concrete with GISS is smaller than that of the pure cement concrete.

引用

页码：337 / 342

页数：6

共 15 条

[1] BACKSCATTERED ELECTRON IMAGING OF CEMENT PASTES CURED AT ELEVATED-TEMPERATURES [J].

CAO, YJ ;

DETWILER, RJ .

CEMENT AND CONCRETE RESEARCH, 1995, 25 (03) :627-638

[2] The microstructure and mechanical properties of blended cements hydrated at various temperatures [J].

Escalante-García, JI ;

Sharp, JH .

CEMENT AND CONCRETE RESEARCH, 2001, 31 (05) :695-702

[3]

Klieger P., 1958, J AM CONCR I, V54, P1063

[4] Properties and hydration of blended cements with steelmaking slag [J].

Kourounis, S. ;

Tsivilis, S. ;

Tsakiridis, P. E. ;

Papadimitriou, G. D. ;

Tsibouki, Z. .

CEMENT AND CONCRETE RESEARCH, 2007, 37 (06) :815-822

[5] Influence of curing temperature on cement hydration and mechanical strength development of fly ash mortars [J].

Maltais, Y ;

Marchand, J .

CEMENT AND CONCRETE RESEARCH, 1997, 27 (07) :1009-1020

[6] Producing Portland cement from iron and steel slags and limestone [J].

Monshi, A ;

Asgarani, MK .

CEMENT AND CONCRETE RESEARCH, 1999, 29 (09) :1373-1377

[7] Impact of prolonged warm (85°C) moist cure on Portland cement paste [J].

Paul, M ;

Glasser, FP .

CEMENT AND CONCRETE RESEARCH, 2000, 30 (12) :1869-1877

[8] Characteristics and cementitious properties of ladle slag fines from steel production [J].

Shi, CJ .

CEMENT AND CONCRETE RESEARCH, 2002, 32 (03) :459-462

[9] Evaluation of early age mechanical properties of concrete in real structure [J].

Wang, Jiachun ;

Yan, Peiyu .

COMPUTERS AND CONCRETE, 2013, 12 (01) :53-64

[10] Influence of steel slag on mechanical properties and durability of concrete [J].

Wang Qiang ;

Yan Peiyu ;

Yang Jianwei ;

Zhang Bo .

CONSTRUCTION AND BUILDING MATERIALS, 2013, 47 :1414-1420

← 1 2 →