Evaluating the Effect of the Competition between NbC Precipitation and Grain Size Evolution on the Hot Ductility of Nb Containing Steels

被引:15
作者
Furumai, Kohei [1 ]
Wang, Xiang [2 ]
Zurob, Hatem [2 ]
Phillion, Andre [2 ]
机构
[1] JFE Steel Corp, Steelmaking Res Dept, Steel Res Lab, 1 Kokan Cho, Fukuyama, Hiroshima 7218510, Japan
[2] McMaster Univ, Dept Mat Sci & Engn, 1280 Main St West, Hamilton, ON L8S 4L7, Canada
关键词
continuous casting; Nb-containing steel; austenite grain growth; ferrite and austenite phases; precipitation; ductility; crack; AUSTENITE; NIOBIUM; RECRYSTALLIZATION; DIFFUSION; ADDITIONS; BEHAVIOR; CARBON; MODEL;
D O I
10.2355/isijinternational.ISIJINT-2018-716
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The hot ductility of steels containing 0-0.06 wt.%Nb has been evaluated through gamma grain growth experiments and hot stage tensile tests of the alpha + gamma two phase region in order to clarify the roles of NbC precipitation and gamma grain size evolution resulting from Nb-initiated solute drag on hot ductility in this important material property. The experimental results show that (1) a decrease in gamma grain size as a result of Nb-initiated solute drag improves hot ductility, (2) for a given gamma grain size, hot ductility decreases with increasing Nb content because the corresponding increase in NbC precipitation fraction increases strength, and (3) the variation in ductility with Nb content is smaller when the gamma grain size is smaller. These competing effects of gamma grain size and NbC precipitation affect the strain incompatibility between the alpha and gamma phases, leading to the onset of surface cracking during continuous casting when the incompatibility is high. The underlying mechanisms controlling ductility in Nb-containing steels are demonstrated using a model that partitions strain between the alpha and gamma phases.
引用
收藏
页码:1064 / 1071
页数:8
相关论文
共 33 条
  • [1] The influence of niobium microalloying on austenite grain coarsening behavior of Ti-modified SAE 8620 steel
    Alogab, K. A.
    Matlock, D. K.
    Speer, J. G.
    Kleebe, H. J.
    [J]. ISIJ INTERNATIONAL, 2007, 47 (02) : 307 - 316
  • [2] Banks K.M., 2013, Int. J. Metall. Eng, V2, P188, DOI [10.5923/j.ijmee.20130202.10, DOI 10.5923/J.IJMEE.20130202.10]
  • [3] IMPURITY-DRAG EFFECT IN GRAIN BOUNDARY MOTION
    CAHN, JW
    [J]. ACTA METALLURGICA, 1962, 10 (SEP): : 789 - &
  • [4] Hot Ductility of Nb- and Ti-Bearing Microalloyed Steels and the Influence of Thermal History
    Carpenter, K. R.
    Dippenaar, R.
    Killmore, C. R.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (03): : 573 - 580
  • [5] Micromechanical investigation of the hot ductility behavior of steel
    Chimani, CM
    Mörwald, K
    [J]. ISIJ INTERNATIONAL, 1999, 39 (11) : 1194 - 1197
  • [6] CROWTHER DN, 1987, T IRON STEEL I JPN, V27, P366
  • [7] CROWTHER DN, 1986, MATER SCI TECH SER, V2, P1099, DOI 10.1179/026708386790328560
  • [8] GEISE J, 1985, Z METALLKD, V76, P622
  • [9] Gerold V., 1979, Dislocations in solids, vol.IV. Dislocations in metallurgy, P219
  • [10] Gladman T., 1997, PHYS METALLURGY MICR, P159