Effect of Silane Treatment on SiC Particles Used as Reinforcement in Epoxy Resins

被引：48

作者：

Abenojar, J. ^{[2
]}

del Real, J. C. ^{[1
]}

Martinez, M. A. ^{[2
]}

Cano de Santayana, M. ^{[1
]}

机构：

[1] Univ Pontificia Comillas Madrid ICAI, Dept Mech Engn, Madrid 28015, Spain

[2] Univ Carlos III Madrid, Sci & Engn Mat Dept, Leganes, Spain

来源：

JOURNAL OF ADHESION | 2009年 / 85卷 / 06期

关键词：

Epoxy resin; Particle reinforcement; Silanes; Surface treatment; Wear; SILICON-CARBIDE; WEAR; NANOCOMPOSITES; NANOPARTICLES; FRICTION; MODEL;

D O I：

10.1080/00218460902880131

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Silicon carbide (SiC) is used as reinforcement in polymeric materials due to its high resistance to abrasive wear and hardness. However, sometimes the lack of anchoring between the SiC particles and the polymer produces some negative effects. The unbonding particles can act as crack initiators. They also can increase the wear erosion. The aim of this work is to improve the adhesion between the epoxy resin and the SiC particles using a silane coupling agent to coat the ceramic particles. In this study, a room temperature curing two-component epoxy was used. SiC particles with a mean diameter of 10m were added to the epoxy resin in proportions of 6 and 12% by weight. The organosilane used was -glicidoxypropyltrimethoxysilane (-GPS). Strength was evaluated on bulk specimens by means of three-point bending test and hardness Shore D measurements. A pin on disk test was carried out to evaluate wear. Wear tracks as well as fracture surfaces of the materials were studied by scanning electron microscopy (SEM). Aluminium and steel specimens were also coated with the SiC/epoxy composites to evaluate its effectiveness as a wear-resistance coating. Pin on disk tests were done to study the SiC/epoxy composites' wear behavior.

引用

页码：287 / 301

页数：15

共 20 条

[1]

ABENOJAR J, 2007, INT C ADV COMP ENG E, P98

[2]

Adebahr T., 2001, EUROPEAN COATINGS J, V4, P144

[3] INSTABILITY IN THE TRIBOCHEMICAL WEAR OF SILICON-CARBIDE IN UNLUBRICATED SLIDING CONTACTS [J].

ANDERSSON, P ;

BLOMBERG, A .

WEAR, 1994, 174 (1-2) :1-7

[4]

[Anonymous], 2005, G9905 ASTM INT

[5] Preparation methodologies of polymer matrix nanocomposites [J].

Avella, M ;

Errico, ME ;

Martelli, S ;

Martuscelli, E .

APPLIED ORGANOMETALLIC CHEMISTRY, 2001, 15 (05) :435-439

[6] A MODEL FOR THE ABRASIVE WEAR-RESISTANCE OF MULTIPHASE MATERIALS [J].

AXEN, N ;

JACOBSON, S .

WEAR, 1994, 174 (1-2) :187-199

[7] Functionalized inorganic/organic nanocomposites as new basic raw materials for adhesives and sealants - Part 2 [J].

Bauer, F. ;

Decker, U. ;

Ernst, H. ;

Findelsen, M. ;

Langguth, H. ;

Mehnert, R. ;

Sauerland, V. ;

Hinterwaldner, R. .

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2006, 26 (07) :567-570

[8]

Bowtell M, 1998, ADHES AGE, V41, P45

[9]

Dennis HR, 2001, PLAST ENG, V57, P56

[10] ROLE OF REINFORCING CERAMIC PARTICLES IN THE WEAR BEHAVIOR OF POLYMER-BASED MODEL COMPOSITES [J].

DURAND, JM ;

VARDAVOULIAS, M ;

JEANDIN, M .

WEAR, 1995, 181 :833-839

← 1 2 →