Phase Evolution in Hypereutectic Al90Cu10-xNix (x=0, 5) Alloys

被引:3
作者
Samal, Sumanta [1 ]
Phanikumar, Gandham [1 ]
机构
[1] Indian Inst Technol, Dept Met & Mat Engn, Madras 600036, Tamil Nadu, India
关键词
Aluminium alloys; Microstructure; Quasi-peritectic reaction; X-ray diffraction; Electron microscopy; NANOSTRUCTURE-DENDRITE COMPOSITE; EUTECTIC STRUCTURE; WORK;
D O I
10.1007/s12666-015-0709-3
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The present work is aimed at understanding the phase evolution of hypereutectic Al-rich Al-Cu-Ni in situ composites consisting of ultrafine eutectic with micron scale dendrites. The hypereutectic Al90Cu10-xNix (x = 0, 5) are synthesized by vacuum arc melting technique under high purity argon atmosphere. Detailed X-ray diffraction and electron microscopic (SEM and TEM coupled with EDS) studies have been carried out to identify the phases in these alloys. Thermodynamic calculations performed using CALPHAD approach using ThermoCalc(A (R)) software predict the equilibrium solidification path. The Al90Cu5Ni5 alloy exhibits ternary quasi-peritectic reaction of L + Al3Ni -> (Al)(ss) + Al3Ni2 at invariant point, which is supported by two univariant reactions i.e. L + Al3Ni -> Al3Ni2 and L -> (Al)(ss) + Al3Ni2 above and below the invariant point respectively.
引用
收藏
页码:1221 / 1226
页数:6
相关论文
共 23 条
  • [11] Investigation of Ti-Fe-Co bulk alloys with high strength and enhanced ductility
    Louzguine-Luzgin, DV
    Louzguina-Luzgina, LV
    Kato, H
    Inoue, A
    [J]. ACTA MATERIALIA, 2005, 53 (07) : 2009 - 2017
  • [12] Massalski T.B., 1996, Binary Alloy Phase Diagrams, V2nd
  • [13] Development of ultrafine Ti-Fe-Sn in-situ composite with enhanced plasticity
    Mondal, B.
    Samal, S.
    Biswas, K.
    Govind
    [J]. 3RD INTERNATIONAL CONFERENCE ON ADVANCES IN SOLIDIFICATION PROCESSES, 2012, 27
  • [14] Tensile properties of peak aged 7055 aluminum alloy extrusions
    Mondal, Chandan
    Mukhopadhyay, A. K.
    Raghu, T.
    Varma, V. K.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 : 673 - 678
  • [15] Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminum alloy sheets
    Mondal, Chandan
    Singh, A. K.
    Mukhopadhyay, A. K.
    Chattopadhyay, K.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 577 : 87 - 100
  • [16] The Effect of Minor Addition of Ni on the Microstructural Evolution and Mechanical Properties of Suction Cast Al-0.14 at. pct Sc Binary Alloy
    Nandi, Proloy
    Suwas, Satyam
    Kumar, Subodh
    Chattopadhyay, Kamanio
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (06): : 2591 - 2603
  • [17] Samal Sumanta, 2014, Materials Science Forum, V790-791, P497, DOI 10.4028/www.scientific.net/MSF.790-791.497
  • [18] Microstructural Evolution in Novel Suction Cast Multicomponent Ti-Fe-Co Alloys
    Samal, Sumanta
    Agarwal, Swapnil
    Gautam, Priya
    Biswas, Krishanu
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (02): : 851 - 868
  • [19] Novel high-strength NiCuCoTiTa alloy with plasticity
    Samal, Sumanta
    Biswas, Krishanu
    [J]. JOURNAL OF NANOPARTICLE RESEARCH, 2013, 15 (07)
  • [20] Electron Microscopic Study on the Suction Cast In Situ Ti-Fe-Sn Ultrafine Composites
    Samal, Sumanta
    Mondal, Barnali
    Biswas, Krishanu
    Govind
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (01): : 427 - 439