A modelling of cutting for viscoplastic materials

被引：97
作者：
Dudzinski, D
Molinari, A
机构：
来源：
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 1997年 / 39卷 / 04期
关键词：
orthogonal cutting; high speed machining; thermal sensitive viscoplastic material; primary shear zone;
D O I：
10.1016/S0020-7403(96)00043-4
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A model is presented of stationary shearing produced during the chip formation in orthogonal cutting. The work material is supposed to be a thermal sensitive viscoplastic rigid material. The effects of material parameters, of heat conductivity and of inertia on the distribution of strain rate and of temperature in the primary shear zone are analysed. The cutting forces are calculated for a large range of cutting speeds including high speed machining. The results are obtained by developing a simple one-dimensional modelling of the primary shear zone. Experimental measurements are compared with the theoretical results. Copyright (C) 1996 Elsevier Science Ltd.
引用
收藏
页码：369 / 389
页数：21
相关论文
共 24 条
  • [1] Arndt G., 1973, P I MECH ENG, V187, P625, DOI DOI 10.1243/PIME_PROC_1973_187_048_02
  • [2] BODIN L, UNPUB EFFECT HEAT CO
  • [3] Bowden F.P., 1986, The friction and lubrication of solids
  • [4] EARLES WE, 1965, P INSTN MECH ENG, V66, P531
  • [5] Eugene Merchant M, 1945, J APPL PHYS, V16, P267, DOI DOI 10.1063/1.1707586
  • [6] GAMACHO G, 1993, P WINT ANN M ASME NE
  • [7] A MACHINING THEORY FOR PREDICTING CHIP GEOMETRY, CUTTING FORCES ETC FROM WORK MATERIAL PROPERTIES AND CUTTING CONDITIONS
    HASTINGS, WF
    MATHEW, P
    OXLEY, PLB
    [J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1980, 371 (1747): : 569 - 587
  • [8] HUCKS H, 1952, WERKSTATT BETR, V1, P1
  • [9] King R. I., 1985, HDB HIGH SPEED MACHI, P3
  • [10] KOMANDURI R, 1984, HIGH SPEED MACHINING, P15
123