Technological properties of soil-cement bricks produced with iron ore mining waste

被引：41

作者：

Vilela, Alan Pereira ^{[1
]}

Carvalho Eugenio, Tony Matheus ^{[1
]}

de Oliveira, Fernando Fonseca ^{[1
]}

Mendes, Juliana Farinassi ^{[1
]}

Cornelio Ribeiro, Andre Geraldo ^{[1
]}

Brandao Vaz, Livia Elisabeth Vasconcellos de S. ^{[1
]}

Mendes, Rafael Farinassi ^{[1
]}

机构：

[1] Univ Fed Lavras, Lavras, MG, Brazil

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2020年 / 262卷

关键词：

Composites; Sustainability; Physical-mechanical properties; Thermal comfort; COMPRESSIVE STRENGTH; ENGINEERING PROPERTIES; MECHANICAL-PROPERTIES; FLY-ASH; FIBERS; REINFORCEMENT; DURABILITY; CONCRETE; BEHAVIOR;

D O I：

10.1016/j.conbuildmat.2020.120883

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Soil-cement brick is a composite obtained by mixing soil, cement, and water in previously established proportions. This material is an alternative for urban or rural construction, as it offers several advantages for its use in masonry, such as the addition of waste. For the addition of waste into cement materials the waste from iron ore extraction process has been highlighted Thousands of tons of this waste are generated on a daily basis large mining companies, leading to air pollution and the occupation of large physical spaces. Thus, the aim of this work was to evaluate the effect of replacing different percentages (0, 10, 20, 30, and 40%) of soil by this mining waste on the properties of soil-cement bricks. The raw materials used were: soil (A-4 classification), CPV-ARI cement, and solid mining waste, which were characterized by physicochemical analysis. The mix ratio used for bricks production was 1:9 (cement:soil), where soil was replaced by different waste percentages. Technological properties such as: dry density, water absorption, immersion mass loss, compressive strength, thermal conductivity, and microstructure were determined. The results indicated that the added mining waste positively influenced the density of cement bricks in the soil. In addition, up to 40% of the waste could be incorporated into the brick, considering the current characterisation standards. (C) 2020 Elsevier Ltd. All rights reserved.

引用

页数：11

共 63 条

[1]

American Society for Testing and Materials, 1998, D4318 ASTM INT

[2]

[Anonymous], 2003, METODOS ENSAIO DETER, V12

[3]

[Anonymous], 1984, 7181 NBR ASS BRAS NO

[4]

Aristimunho P. B., 2012, Rev. IBRACON Estrut. Mater., V5, P153

[5] An experimental investigation on equilibrium moisture content of earth plaster with natural reinforcement fibres for straw bale buildings [J].

Ashour, Taha ;

Georg, Heiko ;

Wu, Wei .

APPLIED THERMAL ENGINEERING, 2011, 31 (2-3) :293-303

[6]

Associacao Brasileira de Cimento Portland, 1986, ET35 ABCP

[7]

Associacao Brasileira De Normas Tecnicas, 2014, 5752 NBR ASS BRAS NO

[8]

Associacao Brasileira de Normas TECNICAS, 2012, 8492 NBR ASS BRAS NO

[9]

Associacao Brasileira de Normas Tecnicas, 2012, 8491 NBR ASS BRAS NO

[10]

Associacao Brasileira de Normas Tecnicas, 1992, 12023 NBR ASS BRAS N

← 1 2 3 4 5 6 7 →