Numerical investigation of the lateral-torsional buckling of beams with slender cross sections for the case of fire

被引：62

作者：

Couto, Carlos ^{[1
]}

Real, Paulo Vila ^{[1
]}

Lopes, Nuno ^{[1
]}

Zhao, Bin ^{[2
]}

机构：

[1] Univ Aveiro, Dept Civil Engn, RISCO, P-3870193 Aveiro, Portugal

[2] CTICM, F-91193 Paris, France

来源：

ENGINEERING STRUCTURES | 2016年 / 106卷

关键词：

Lateral-torsional buckling (LTB); Beams; Slender; Fire; Effective section factor; Class; 4; STEEL-I-BEAMS; ELEVATED-TEMPERATURES; RESISTANCE; DESIGN; PROPOSAL;

D O I：

10.1016/j.engstruct.2015.10.045

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

An extensive numerical study is performed to investigate the lateral torsional buckling of steel beams with slender cross sections for the case of fire. The influence of local buckling is analysed, and the numerical results are compared to the simplified design methods of Part 1-2 of Eurocode 3 for the case of beams with Class 1 and 2 cross sections. The actual provisions of Eurocode 3 Part 1-2 are demonstrated to be unreliable. A parametric study is carried out to investigate the influence of several parameters on the resistance of laterally unrestrained steel beams with slender cross sections for the case of fire: the effective section factor, temperature, steel grade, depth-to-width ratio (h/b) and residual stresses. Based on the parametric study, a proposal for a new design curve is made for beams with slender cross sections for the case of fire, taking into account the influence of local buckling by grouping the response of beams into different ranges of effective section factors. The capacity predicted by the simplified methods using the proposed design curve leads to an improved yet safe design method compared to the results of the finite element analysis. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：410 / 421

页数：12

共 35 条

[1]

[Anonymous], 2005, 1993122005 BS EN

[2]

[Anonymous], 2014, FIDESC4

[3]

[Anonymous], 2005, Design of Steel Structures

[4]

[Anonymous], 2006, EN 1993-1-5 Eurocode 3: Design of steel structures. Part 1-5: Plated structural elements