Optimization of scanning parameters for MR elastography at 3.0 T clinical unit: volunteer study

We sought to optimize scanning parameters for MR elastography at 3.0 T clinical unit. 10 volunteers were scanned with various magnetization encoding gradient (MEG) frequencies from 60 to 120 Hz at every 10 Hz, with otherwise fixed parameters (external driver frequency/amplitude = 60 Hz/50 %, 10 mm slice thickness, etc.). Images were qualitatively assessed for the degree of image defects, and also quantitatively for the areas without cross-hatching. After determining optimal MEG frequency, external driver amplitudes of 70 % (vs 50 %) and slice thickness of 8 mm (vs 10 mm) were also tested. With the optimized parameters, scans were repeated 1 week after the initial scan, and the repeatability of the liver stiffness measurement was validated. 80 or 90 Hz was shown to be the best MEG frequency. There were no significant differences in the qualitative and quantitative assessment between the two amplitudes and two slice thicknesses; however, 70 % amplitude resulted in discomfort at the chest wall beneath the external acoustic driver. Thus, MEG 80 (or 90) Hz, amplitude 50 %, and thickness 10 (or 8) mm were considered optimal. Repeatability of the liver stiffness measurement was +/- 10 % (95 % confidence interval). With the optimized parameters, repeatability of +/- 10 % in liver stiffness measurement was obtained.