System impact of heat exchanger pressure loss in ORCs for smelter offgas waste heat recovery

被引:6
作者
Nikolaisen, Monika [1 ]
Andresen, Trond [1 ]
机构
[1] SINTEF Energy Res, Dept Gas Technol, Sem Saelands Vei 11, N-7034 Trondheim, Norway
关键词
Waste heat recovery; Aluminum smelter off-gas; ORC optimization; Heat exchanger pressure loss; Hydrocarbon working fluid; RANKINE-CYCLE SYSTEM; THERMAL INTEGRATION; ENERGY EFFICIENCY; SCROLL EXPANDER; ALUMINUM; OPTIMIZATION; REDUCTION; EMISSIONS; R245FA;
D O I
10.1016/j.energy.2020.118956
中图分类号
O414.1 [热力学];
学科分类号
摘要
Applying Rankine cycles to smelter off-gas could increase the required off-gas fan power in an order of magnitude equivalent to the power production. Predicting the fan power is not straightforward since it is affected in two contradictory ways: 1) the heat recovery heat exchanger creates additional off-gas pressure loss, increasing fan power; 2) off-gas cooling reduces pressure loss in the off-gas handling system downstream of the cycle, reducing fan power. The purpose of our study is to analyze the effect of fan power on optimum system performance. While additional fan power can be calculated based on heat exchanger pressure loss, the reduction in fan power depends on the total pressure loss downstream of the cycle, which is unknown. As an alternative to calculating fan power reduction, we account for the offgas cooling effect by including only parts of the fan power caused by heat exchanger pressure loss. Results from three cases show that both heat exchanger and cycle performance strongly depend on the potential for downstream pressure loss reduction. Thus, the total pressure loss in the downstream off-gas handling system has a significant impact on the optimum heat exchanger and cycle performance, and should be accounted for during system design. (C) 2020 The Authors. Published by Elsevier Ltd.
引用
收藏
页数:10
相关论文
共 45 条
[11]   Optimization of Organic Rankine Cycles for Waste Heat Recovery From Aluminum Production Plants [J].
Castelli, Alessandro Francesco ;
Elsido, Cristina ;
Scaccabarozzi, Roberto ;
Nord, Lars O. ;
Martelli, Emanuele .
FRONTIERS IN ENERGY RESEARCH, 2019, 7 (JUN)
[12]   Mapping the Global Flow of Aluminum: From Liquid Aluminum to End-Use Goods [J].
Cullen, Jonathan M. ;
Allwood, Julian M. .
ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2013, 47 (07) :3057-3064
[13]  
de Gromard A, 2016, LIGHT METALS 2014, P623
[14]   Experimental study on an open-drive scroll expander integrated into an ORC (Organic Rankine Cycle) system with R245fa as working fluid [J].
Declaye, Sebastien ;
Quoilin, Sylvain ;
Guillaume, Ludovic ;
Lemort, Vincent .
ENERGY, 2013, 55 :173-183
[15]   A systematic methodology for the techno-economic optimization of Organic Rankine Cycles [J].
Elsido, Cristina ;
Mian, Alberto ;
Martelli, Emanuele .
4TH INTERNATIONAL SEMINAR ON ORC POWER SYSTEMS, 2017, 129 :26-33
[16]  
Fleer M, 2010, Heat Recovery from the Exhaust Gas of Aluminum Reduction Cells
[17]  
Friedel L., 1979, IMPROVED FRICTION PR, V18, P485
[18]  
GNIELINSKI V, 1976, INT CHEM ENG, V16, P359
[19]   Comparison of different ORC typologies for heavy-duty trucks by means of a thermo-economic optimization [J].
Guillaume, Ludovic ;
Lemort, Vincent .
ENERGY, 2019, 182 :706-728
[20]   A novel methodology for Rankine cycle analysis with generic heat exchanger models [J].
Hagen, Brede A. L. ;
Nikolaisen, Monika ;
Andresen, Trond .
APPLIED THERMAL ENGINEERING, 2020, 165