Microstructure and electrochemical properties of nanostructured WC-10Co-4Cr coating prepared by HVOF spraying

被引：48

作者：

Hong, Sheng ^{[1
]}

Wu, Yuping ^{[1
]}

Zheng, Yugui ^{[2
]}

Wang, Bo ^{[1
]}

Gao, Wenwen ^{[1
]}

Lin, Jinran ^{[1
]}

机构：

[1] Hohai Univ, Coll Mech & Mat, Inst Met & Protect, Nanjing 210098, Jiangsu, Peoples R China

[2] Chinese Acad Sci, Inst Met Res, State Key Lab Corros & Protect, Shenyang 110016, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2013年 / 235卷

关键词：

HVOF; Nanostructured; WC-Co-Cr coating; Microstructure; Corrosion; STRONG ACIDIC ENVIRONMENT; IMPEDANCE PLANE DISPLAYS; SILT EROSION BEHAVIOR; WC-COCR COATINGS; HARD CHROMIUM; CORROSION BEHAVIOR; MECHANICAL-PROPERTIES; STABILITY CONDITIONS; METALLIC-GLASS; STEADY-STATE;

D O I：

10.1016/j.surfcoat.2013.08.029

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A nanostructured WC-10Co-4Cr coating was deposited on the substrate of AISI 1045 steel by means of high-velocity oxygen-fuel (HVOF) thermal spraying process. The detailed microstructures and phase composition of the coating were analyzed by using X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), differential scanning calorimeter (DSC) and high-resolution transmission electron microscope (HRTEM). It was revealed that the amorphous phase, nanoclusters and carbides, including W2C and WC were present in the coating. The coating with low porosity of 0.85% had a dense structure and good thermostability. The temperature of the amorphous phase transforming into the nanocrystalline structure was 645 degrees C. Corrosion behavior of the coatings was investigated by electrochemical measurement. The results showed that the coating exhibited better corrosion resistance than the hard chromium coating in 3.5 wt.% NaCl solution. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：582 / 588

页数：7

共 36 条

[11] Comparative study of Cr3C2-NiCr coatings obtained by HVOF and hard chromium coatings
Guilemany, J. M.
Espallargas, N.
Suegama, P. H.
Benedetti, A. V.
[J]. CORROSION SCIENCE, 2006, 48 (10) : 2998 - 3013
[12] Characterization of the W2C phase formed during the high velocity oxygen fuel spraying of a WC+12 pct Co powder
Guilemany, JM
de Paco, JM
Nutting, J
Miguel, JR
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (08): : 1913 - 1921
[13] Cavitation silt erosion behaviour of HVOF sprayed nickel based alloy coatings
Hong, S.
Wu, Y. P.
Wang, Q.
Li, G. Y.
Ying, G. B.
Wang, B.
Gao, W. W.
[J]. SURFACE ENGINEERING, 2013, 29 (08) : 588 - 593
[14] Microstructural characteristics of high-velocity oxygen-fuel (HVOF) sprayed nickel-based alloy coating
Hong, Sheng
Wu, Yuping
Li, Gaiye
Wang, Bo
Gao, Wenwen
Ying, Guobing
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 581 : 398 - 403
[15] Microstructure and cavitation-silt erosion behavior of high-velocity oxygen-fuel (HVOF) sprayed Cr3C2-NiCr coating
Hong, Sheng
Wu, Yuping
Wang, Qian
Ying, Guobing
Li, Gaiye
Gao, Wenwen
Wang, Bo
Guo, Wenmin
[J]. SURFACE & COATINGS TECHNOLOGY, 2013, 225 : 85 - 91
[16] Comparative Study of Thermally Sprayed Coatings Under Different Types of Wear Conditions for Hard Chromium Replacement
Houdkova, S.
Zahalka, F.
Kasparova, M.
Berger, L-M
[J]. TRIBOLOGY LETTERS, 2011, 43 (02) : 139 - 154
[17] Bulk amorphous FC20 (Fe-C-Si) alloys with small amounts of B and their crystallized structure and mechanical properties
Inoue, A
Wang, XM
[J]. ACTA MATERIALIA, 2000, 48 (06) : 1383 - 1395
[18] AL-LA-NI AMORPHOUS-ALLOYS WITH A WIDE SUPERCOOLED LIQUID REGION
INOUE, A
ZHANG, T
MASUMOTO, T
[J]. MATERIALS TRANSACTIONS JIM, 1989, 30 (12): : 965 - 972
[19] Thermal and magnetic properties of bulk Fe-based glassy alloys prepared by copper mold casting
Inoue, A
Shinohara, Y
Gook, JS
[J]. MATERIALS TRANSACTIONS JIM, 1995, 36 (12): : 1427 - 1433
[20] Formation of an amorphous phase in thermally sprayed WC-Co
Li, CJ
Ohmori, A
Harada, Y
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1996, 5 (01) : 69 - 73

← 1 2 3 4 →