An ultrasonic motor using transmission line and spiral structure driven by a Langevin transducer

被引:0
作者
Ishii, Takaaki [1 ]
Mochizuki, Masaki [1 ]
Shimizu, Tsuyoshi [1 ]
机构
[1] Univ Yamanashi, Dept Mech, Kofu, Yamanashi 4008511, Japan
来源
2015 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS) | 2015年
关键词
Langevin transducer; transmission line; spiral structure; ultrasonic motor; TORSIONAL VIBRATION CONVERTER; LOAD CHARACTERISTICS; ROTARY MOTOR;
D O I
10.1109/ULTSYM.2015.0541
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
An ultrasonic micro-motor usually has small torque because of its small sized rotor. If we can use large sized transducer, such as bolt clamped Langevin transducer, we can expect an ultrasonic micro-motor with high performance. In this research, a Langevin transducer with 31.5 mm in diameter is used to drive a rotor with 5 mm in diameter. Spiral structure is used to excite both longitudinal and torsional vibration to drive the rotor. The maximum revolution speed was 147 r.p.m. at applied voltage of 60 Vp-p, the maximum torque was 0.061 mNm at applied voltage of 60 Vp-p, and the maximum driving efficiency was 0.0059 % at applied voltage of 50 Vp-p.
引用
收藏
页数:3
相关论文
共 50 条
[31]   A Standing Wave Piezoelectric Ultrasonic Motor Using a Single Flexural Vibration Ring Transducer [J].
Shafik, M. ;
Makombe, L. .
AUTOMATIC CONTROL AND MECHATRONIC ENGINEERING II, 2013, 415 :126-+
[32]   Design and Analysis of a Cylindrical Traveling Wave Ultrasonic Motor Using Orthogonal Longitudinal Composite Transducer [J].
Liu, Ying-xiang ;
Liu, Jun-kao ;
Chen, Wei-shan ;
Shi, Sheng-jun .
ADVANCED DESIGN AND MANUFACTURE II, 2010, 419-420 :261-264
[33]   A Two-DOF Ultrasonic Motor Using a Longitudinal-Bending Hybrid Sandwich Transducer [J].
Liu, Yingxiang ;
Yan, Jipeng ;
Wang, Liang ;
Chen, Weishan .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2019, 66 (04) :3041-3050
[34]   COMPUTER SIMULATION AND MODELLING OF STANDING WAVE PIEZOELECTRIC ULTRASONIC MOTOR USING A SINGLE FLEXURAL TRANSDUCER [J].
Shafik, M. .
INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING, 2013, :105-112
[35]   Working principle and design of a double cylinders type traveling wave ultrasonic motor using composite transducer [J].
陈维山 ;
刘英想 ;
刘军考 ;
石胜君 .
Journal of Harbin Institute of Technology(New series), 2011, (02) :28-32
[36]   Actuating Mechanism and Design of a Double Driving Feet Linear Ultrasonic Motor Using Longitudinal Vibration Transducer [J].
Chen, Weishan ;
Liu, Yingxiang ;
Liu, Junkao ;
Shi, Shengjun .
HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 :775-778
[37]   Working Principle and Design of a Cylindrical Standing Wave Ultrasonic Motor Using Cantilever Type Bending Transducer [J].
Liu, Yingxiang ;
Liu, Junkao ;
Chen, Weishan ;
Shi, Shengjun .
HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 :771-774
[38]   Design and Analysis of a Ring Type Traveling Wave Ultrasonic Motor Using Cantilever Type Composite Transducer [J].
Liu, Yingxiang ;
Liu, Junkao ;
Chen, Weishan ;
Shi, Shengjun .
MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2, 2009, 79-82 :1411-1414
[39]   Design of an EBG Structure by Using a Transmission Line Model [J].
Bozzetti, M. ;
Gallo, M. ;
Losito, O. .
2009 3RD EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION, VOLS 1-6, 2009, :3074-3077
[40]   An ultrasonic motor using an injection-molded plastic rotor and its application to motor-driven potentiometers [J].
Kato, K ;
Sase, T ;
Chiba, M .
ELECTRONICS AND COMMUNICATIONS IN JAPAN PART II-ELECTRONICS, 2000, 83 (08) :8-17