An ultrasonic motor using transmission line and spiral structure driven by a Langevin transducer

被引：0

作者：

Ishii, Takaaki ^{[1
]}

Mochizuki, Masaki ^{[1
]}

Shimizu, Tsuyoshi ^{[1
]}

机构：

[1] Univ Yamanashi, Dept Mech, Kofu, Yamanashi 4008511, Japan

来源：

2015 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS) | 2015年

关键词：

Langevin transducer; transmission line; spiral structure; ultrasonic motor; TORSIONAL VIBRATION CONVERTER; LOAD CHARACTERISTICS; ROTARY MOTOR;

D O I：

10.1109/ULTSYM.2015.0541

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

An ultrasonic micro-motor usually has small torque because of its small sized rotor. If we can use large sized transducer, such as bolt clamped Langevin transducer, we can expect an ultrasonic micro-motor with high performance. In this research, a Langevin transducer with 31.5 mm in diameter is used to drive a rotor with 5 mm in diameter. Spiral structure is used to excite both longitudinal and torsional vibration to drive the rotor. The maximum revolution speed was 147 r.p.m. at applied voltage of 60 Vp-p, the maximum torque was 0.061 mNm at applied voltage of 60 Vp-p, and the maximum driving efficiency was 0.0059 % at applied voltage of 50 Vp-p.

引用

页数：3

共 50 条

[1] An ultrasonic motor using transmission line and horn with oblique slits driven by a Langevin transducer [J].

Ishii, Takaaki ;

Takehana, Souichiro ;

Shimizu, Tsuyoshi .

2015 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2015,

[2] An ultrasonic motor with 2 mm in rotor diameter using transmission line and a spring washer driven by a Lagevin transducer [J].

Hosokawa, Keishu ;

Ishii, Takaaki ;

Shimizu, Tsuyoshi .

2018 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2018,

[3] Ultrasonic linear motor using the L-B mode Langevin transducer with an exponential horn [J].

Shi S. ;

Chen W. ;

Liu J. ;

Zhao X. .

Frontiers of Mechanical Engineering in China, 2008, 3 (2) :212-217

[4] An ultrasonic motor for cryogenic temperature using bolt-clamped Langevin-type transducer [J].

Yamaguchi, Daisuke ;

Kanda, Takefumi ;

Suzumori, Koichi .

SENSORS AND ACTUATORS A-PHYSICAL, 2012, 184 :134-140

[5] Traveling wave ultrasonic motor using a flexural composite transducer [J].

Satonobu, J ;

Fukami, M ;

Nakagawa, N .

JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 2003, 42 (5B) :3007-3011

[6] Numerical analysis of the hybrid transducer ultrasonic motor: comparison of characteristics calculated by transmission-line and lumped-element models [J].

Satonobu, J ;

Friend, JR ;

Nakamura, K ;

Ueha, S .

ULTRASONICS, 2002, 39 (08) :559-565

[7] A high speed ultrasonic linear motor using longitudinal and bending multimode bolt-clamped Langevin type transducer [J].

Shi, Shengjun ;

Chen, Weishan ;

Liu, Junkao .

IEEE ICMA 2006: PROCEEDING OF THE 2006 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2006, :612-+

[8] Design and Fabrication of a Linear Ultrasonic Motor Using Push-Pull type L-B Hybrid Langevin Transducer with Single Foot [J].

Shi, Shengjun ;

Chen, Weishan ;

Liu, Yingxiang ;

Liu, Junkao ;

Xie, Tao .

2008 IEEE ULTRASONICS SYMPOSIUM, VOLS 1-4 AND APPENDIX, 2008, :157-160

[9] Bolt-Clamped Langevin-Type Transducer for Ultrasonic Motor used at Ultralow Temperature [J].

Yamaguchi, Daisuke ;

Kanda, Takefumi ;

Suzumori, Koichi .

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (01) :104-112

[10] Linear ultrasonic motor using quadrate plate transducer [J].

Jin, Jiamei ;

Zhao, Chunsheng .

FRONTIERS OF MECHANICAL ENGINEERING, 2009, 4 (01) :88-91

← 1 2 3 4 5 →