An ultrasonic motor using transmission line and spiral structure driven by a Langevin transducer

被引：0
|
作者：
Ishii, Takaaki [1 ]
Mochizuki, Masaki [1 ]
Shimizu, Tsuyoshi [1 ]
机构：
[1] Univ Yamanashi, Dept Mech, Kofu, Yamanashi 4008511, Japan
来源：
2015 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS) | 2015年
关键词：
Langevin transducer; transmission line; spiral structure; ultrasonic motor; TORSIONAL VIBRATION CONVERTER; LOAD CHARACTERISTICS; ROTARY MOTOR;
D O I：
10.1109/ULTSYM.2015.0541
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
An ultrasonic micro-motor usually has small torque because of its small sized rotor. If we can use large sized transducer, such as bolt clamped Langevin transducer, we can expect an ultrasonic micro-motor with high performance. In this research, a Langevin transducer with 31.5 mm in diameter is used to drive a rotor with 5 mm in diameter. Spiral structure is used to excite both longitudinal and torsional vibration to drive the rotor. The maximum revolution speed was 147 r.p.m. at applied voltage of 60 Vp-p, the maximum torque was 0.061 mNm at applied voltage of 60 Vp-p, and the maximum driving efficiency was 0.0059 % at applied voltage of 50 Vp-p.
引用
收藏
页数：3
相关论文
共 50 条
  • [1] An ultrasonic motor using transmission line and horn with oblique slits driven by a Langevin transducer
    Ishii, Takaaki
    Takehana, Souichiro
    Shimizu, Tsuyoshi
    2015 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2015,
  • [2] An ultrasonic motor with 2 mm in rotor diameter using transmission line and a spring washer driven by a Lagevin transducer
    Hosokawa, Keishu
    Ishii, Takaaki
    Shimizu, Tsuyoshi
    2018 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2018,
  • [3] Ultrasonic linear motor using the L-B mode Langevin transducer with an exponential horn
    Shi S.
    Chen W.
    Liu J.
    Zhao X.
    Frontiers of Mechanical Engineering in China, 2008, 3 (2): : 212 - 217
  • [4] An ultrasonic motor for cryogenic temperature using bolt-clamped Langevin-type transducer
    Yamaguchi, Daisuke
    Kanda, Takefumi
    Suzumori, Koichi
    SENSORS AND ACTUATORS A-PHYSICAL, 2012, 184 : 134 - 140
  • [5] Traveling wave ultrasonic motor using a flexural composite transducer
    Satonobu, J
    Fukami, M
    Nakagawa, N
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 2003, 42 (5B): : 3007 - 3011
  • [6] Numerical analysis of the hybrid transducer ultrasonic motor: comparison of characteristics calculated by transmission-line and lumped-element models
    Satonobu, J
    Friend, JR
    Nakamura, K
    Ueha, S
    ULTRASONICS, 2002, 39 (08) : 559 - 565
  • [7] A high speed ultrasonic linear motor using longitudinal and bending multimode bolt-clamped Langevin type transducer
    Shi, Shengjun
    Chen, Weishan
    Liu, Junkao
    IEEE ICMA 2006: PROCEEDING OF THE 2006 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2006, : 612 - +
  • [8] Bolt-Clamped Langevin-Type Transducer for Ultrasonic Motor used at Ultralow Temperature
    Yamaguchi, Daisuke
    Kanda, Takefumi
    Suzumori, Koichi
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (01): : 104 - 112
  • [9] Design and Fabrication of a Linear Ultrasonic Motor Using Push-Pull type L-B Hybrid Langevin Transducer with Single Foot
    Shi, Shengjun
    Chen, Weishan
    Liu, Yingxiang
    Liu, Junkao
    Xie, Tao
    2008 IEEE ULTRASONICS SYMPOSIUM, VOLS 1-4 AND APPENDIX, 2008, : 157 - 160
  • [10] Linear ultrasonic motor using quadrate plate transducer
    Jin, Jiamei
    Zhao, Chunsheng
    FRONTIERS OF MECHANICAL ENGINEERING, 2009, 4 (01) : 88 - 91
12345