Ti (C, N)-based cermets sintered under high pressure

被引：15
|
作者：
Wang, Yonghua [1 ]
Kou, Zili [1 ]
Liu, Yinjuan [1 ]
Liu, Fangming [1 ]
Duan, Wenrui [1 ]
Deng, Jirui [1 ]
Ma, Yinggong [1 ]
Ma, Dejiang [1 ]
Tan, Lijie [1 ]
Li, Chunxia [1 ]
Zhang, Yajie [1 ]
He, Duanwei [1 ]
机构：
[1] Sichuan Univ, Inst Atom & Mol Phys, Chengdu 610065, Peoples R China
来源：
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2016年 / 54卷
关键词：
Ti(C; N)-based cermets; HPHT; Hardness; Fracture toughness; MECHANICAL-PROPERTIES; MICROSTRUCTURE;
D O I：
10.1016/j.ijrmhm.2015.07.035
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, high pressure and high temperature sintering (HPHT) is adopted in the cermet fabrication process, and the microstructure and mechanical properties of cermets with TiC0.5N0.5-15WC-10Mo(2)C-5TaC-10Ni-10Co (wt%) sintered under 5 GPa and different temperatures (900-1600 degrees C) using 6 x 14 MN cubic press are investigated. Results show that the densities of samples can reach up to 7.00 g/cm(3). Vickers hardness and fracture toughness of the products are over 1727 HV30 and 72 MPa m(1/2) respectively. In addition, the sintering results are compared with the data that obtained from commercial samples which produced via conventional sintering technique. The conclusion is that high density and high hardness cermets can be obtained through HPHT sintering. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：203 / 209
页数：7
相关论文
共 50 条
  • [41] Synergistic effect of Nb and Mo on the microstructural formation of the Ti (C,N)-high chromium ferrous-based cermets
    Maurya, H. S.
    Juhani, K.
    Tarraste, M.
    Viljus, M.
    Sergejev, F.
    Pampori, T. H.
    Hussain, A.
    Kubarsepp, J.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 122
  • [42] Towards High-strength and High-toughness Ti(C,N)-based Cermets: a Technological Review
    Xiao S.
    Liu J.
    Xiao B.
    Deng X.
    Wu S.
    Cailiao Daobao/Materials Review, 2018, 32 (04): : 1129 - 1138
  • [43] Effects of titanium-based raw materials on electrochemical behavior of Ti(C,N)-based cermets
    Zhang, Li
    Feng, Yu-ping
    Nan, Qing
    Ke, Rong-xian
    Wan, Qing-lei
    Wang, Zhe
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 : 11 - 18
  • [44] MICROSTRUCTURE AND PROPERTIES OF THE CERMETS BASED ON Ti(C,N)
    Zhou, S. Q.
    Zhao, W.
    Xiong, W. H.
    MECHANICAL PROPERTIES AND PROCESSING OF CERAMIC BINARY,TERNARY, AND COMPOSITE SYSTEMS, 2009, 29 (02): : 41 - 50
  • [45] Preparation of Nano-TI(C,N) reinforced Ti(C,N)-based cermets
    Xu, ZM
    Yi, XJ
    Hu, MZ
    Xu, SZ
    JOURNAL OF INORGANIC MATERIALS, 2003, 18 (06) : 1210 - 1216
  • [46] Strengthening and toughening of Ti(C,N)-based cermets: (Ti,W)C additive design and the mechanism
    Zhang, Li
    Ling, Qun
    Gu, Jing-hong
    Zhong, Zhi-qiang
    Long, Jia-wei
    Wang, Chun-guang
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, 103
  • [47] Study on the phase evolution, microstructure and densification behavior of (Ti,M)(C,N)-based cermets
    Xiong, Zhengzhuo
    Ye, Jinwen
    Liu, Ying
    Yang, Xiaojiao
    Cao, Qian
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 240 (240)
  • [48] Improvement in densification process and properties of Ti(C,N)-based cermets with vanadium carbide addition
    Lin, Nan
    Zhao, Longbo
    Zou, Jiacheng
    Ma, Chao
    Wang, Zuyong
    He, Yuehui
    CERAMICS INTERNATIONAL, 2019, 45 (02) : 2692 - 2700
  • [49] Grain Growth in Ti(C,N)-Based Cermets During Liquid-Phase Sintering
    Yang, Qingqing
    Xiong, Weihao
    Zhang, Guopeng
    Huang, Bin
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2015, 98 (03) : 1005 - 1012
  • [50] Effects of molybdenum on the microstructure and mechanical properties of Ti(C,N)-based cermets with low Ni
    Wang, SY
    Xiong, WH
    Yan, MS
    Fan, C
    RARE METALS, 2006, 25 (01) : 90 - 95
12345