Effect of strontium modifiers on porosity in cast Al-Si alloys

被引:0
作者
Lee, PD [1 ]
Sridhar, S [1 ]
机构
[1] Univ London Imperial Coll Sci Technol & Med, Dept Mat, London SW7 2BP, England
来源
FUNDAMENTALS OF ADVANCED MATERIALS FOR ENERGY CONVERSION | 2002年
关键词
D O I
暂无
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The effect of strontium on porosity formation in aluminum-silicon alloys is not well understood and there is no consensus upon the cause of the effects observed. This paper describes a series of experiments where the effect of adding strontium on pore formation was observed directly with combination of a traditional temperature gradient stage and real time micro-focus radiography. These in situ observations provide a new insight into the effect of strontium on the nucleation and growth kinetics of porosity. The addition of strontium was found to have a minor effect on the growth of the pores in the mushy zone. However, strontium appeared to alter the nucleation and stability of hydrogen bubbles within the melt. The interaction of strontium with titanium-boride grain refiners produced an even stronger change in the nucleation and stability of the bubbles formed.
引用
收藏
页码:555 / 565
页数:5
相关论文
共 16 条
[1]   The surface tension of molten aluminum and Al-Si-Mg alloy under vacuum and hydrogen atmospheres [J].
Anson, JP ;
Drew, RAL ;
Gruzleski, JE .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 1999, 30 (06) :1027-1032
[2]  
Argo D., 1988, AFS T, V96, P65
[3]   SOLIDIFICATION AND SUSCEPTIBILITY TO HYDROGEN ABSORPTION OF AL-SI ALLOYS CONTAINING STRONTIUM [J].
DENTON, JR ;
SPITTLE, JA .
MATERIALS SCIENCE AND TECHNOLOGY, 1985, 1 (04) :305-311
[4]   THE EFFECT OF NA AND SR MODIFICATION ON SURFACE-TENSION AND VOLUMETRIC SHRINKAGE OF A356 ALLOY AND THEIR INFLUENCE ON POROSITY FORMATION [J].
EMADI, D ;
GRUZLESKI, JE ;
TOGURI, JM .
METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1993, 24 (06) :1055-1063
[5]  
Emadi D., 1996, AFS T, V104, P763
[6]  
Fang QT., 1989, AFS T, V97, P989
[7]  
FLEMINGS MC, 1974, SOLIDIFICATION PROCE, P297
[8]  
HATCH JE, 1998, ALUMINUM PROPERTIES, P224
[9]   TEMPERATURE GRADIENT MICROSCOPE STAGE SUITABLE FOR FREEZING MATERIALS WITH MELTING POINTS BETWEEN -100 AND +200 DEGREES C [J].
HUNT, JD ;
JACKSON, KA ;
BROWN, H .
REVIEW OF SCIENTIFIC INSTRUMENTS, 1966, 37 (06) :805-&
[10]  
Iwahori H., 1990, AFS T, V98, P167