Experimental Investigation of Strength and Stiffness Characteristics of Hot Mix Asphalt (HMA)

被引：13

作者：

Ahmed, Kashif ^{[1
]}

Irfan, Muhammad ^{[1
]}

Ahmed, Sarfraz ^{[1
]}

Ahmed, Arsalan ^{[1
]}

Khattak, Afaq ^{[1
]}

机构：

[1] Natl Univ Sci & Technol, Islamabad, Pakistan

来源：

FOURTH INTERNATIONAL SYMPOSIUM ON INFRASTRUCTURE ENGINEERING IN DEVELOPING COUNTRIES, (IEDC 2013) | 2014年 / 77卷

关键词：

Stiffness; Strength; Resilient Modulus; Indirect Tensile Strength; Marshall Compaction; Gyratory Compaction; RESILIENT MODULUS;

D O I：

10.1016/j.proeng.2014.07.026

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Rutting is a common phenomenon on pavements in Pakistan. Resilient modulus is one the important properties used in the mechanistic analysis of pavement response under dynamic traffic loads as well as used to study the rutting behavior of pavement. This research study investigates the effect of specimen diameter, bitumen grade and compactive effort on the resilient modulus (stiffness) and Indirect tensile strength (Strength) of asphalt concrete. The analysis of experimental results revealed that both the strength and stiffness values for Polymer Modified Bitumen grade were greater than that of unmodified penetration grade bitumen. Similarly, the resilient modulus and indirect tensile strength values of specimens prepared with 100 mm diameter and compacted with Marshall Hammer were more than that of specimens prepared with 150 mm diameter and compacted with gyratory compactor. This research will help the highway agencies in modifying their design methods for asphalt concrete pavements. (C) 2014 Elsevier Ltd.

引用

页码：155 / 160

页数：6

共 11 条

[1]

AASHTO, 1993, AASHTO GUID DES PAV

[2]

ALMUDAIHEEM J, 1991, TRANSP RES RECORD J, V1317, P139

[3]

[Anonymous], 2004, PAVEMENT ANAL DESIGN

[4]

Jahromi SG, 2009, SCI IRAN TRANS A, V16, P367

[5]

Kamal M. A., 2005, J E ASIA SOC TRANSPO, V6, P1329, DOI 10.11175/easts.6.1329

[6]

Kandhal P.S., 1990, COMP EVALUATION 4 IN, DOI [10.21949/1404492, DOI 10.21949/1404492]

[7]

LIM CT, 1995, J TEST EVAL, V23, P436

[8] Measurement of vertical compressive stress pulse in flexible pavements - Representation for dynamic loading tests [J].

Loulizi, A ;

Al-Qadi, IL ;

Lahouar, S ;

Freeman, TE .

PAVEMENT MANAGEMENT, MONITORING, AND ACCELERATED TESTING 2002: PAVEMENT DESIGN, MANAGEMENT, AND PERFORMANCE, 2002, (1816) :125-136

[9]

Pan TY, 2005, TRANSPORT RES REC, P1

[10]

Ullidtz P., 1987, PAVEMENT ANAL

← 1 2 →