CAD/CAM Glass Ceramics for Single-Tooth Implant Crowns: A Finite Element Analysis

被引：1
作者：
Akca, Kivanc [1 ]
Cavusoglu, Yeliz [2 ]
Sagirkaya, Elcin [3 ]
Aybar, Buket [4 ]
Cehreli, Murat Cavit [3 ,5 ]
机构：
[1] Hacettepe Univ, Dept Prosthodont, Fac Dent, TR-06100 Ankara, Turkey
[2] Acibadem Atasehir Med Surg Ctr, Sect Prosthodont, Istanbul, Turkey
[3] Ordu Univ, Dept Prosthodont, Fac Dent, Ordu, Turkey
[4] Istanbul Univ, Dept Oral & Maxillofacial Surg, Fac Dent, Istanbul, Turkey
[5] Ordu Univ, Inst Hlth Sci, Ordu, Turkey
来源：
IMPLANT DENTISTRY | 2013年 / 22卷 / 06期
关键词：
CAD; CAM; single-tooth implant; glass ceramics; finite element analyses; FOLLOW-UP; STRENGTH; RESTORATIONS; RESISTANCE; FATIGUE; DESIGN;
D O I：
10.1097/01.id.0000433589.33926.79
中图分类号：
R78 [口腔科学];
学科分类号：
1003 ;
摘要：
Purpose:To evaluate the load distribution of CAD/CAM mono-ceramic crowns supported with single-tooth implants in functional area.Materials and Methods:A 3-dimensional numerical model of a soft tissue-level implant was constructed with cement-retained abutment to support glass ceramic machinable crown. Implant-abutment complex and the retained crown were embedded in a O 1.5 x 1.5 cm geometric matrix for evaluation of mechanical behavior of mono-ceramic CAD/CAM aluminosilicate and leucite glass crown materials. Laterally positioned axial load of 300 N was applied on the crowns. Resulting principal stresses in the mono-ceramic crowns were evaluated in relation to different glass ceramic materials.Results:The highest compressive stresses were observed at the cervical region of the buccal aspect of the crowns and were 89.98 and 89.99 MPa, for aluminosilicate and leucite glass ceramics, respectively. The highest tensile stresses were observed at the collar of the lingual part of the crowns and were 24.54 and 25.39 MPa, respectively.Conclusion:Stresses induced upon 300 N static loading of CAD/CAM aluminosalicate and leucite glass ceramics are below the compressive strength of the materials. Impact loads may actuate the progress to end failure of mono-ceramic crowns supported by metallic implant abutments.
引用
收藏
页码：623 / 626
页数：4
相关论文
共 23 条
  • [1] Biomechanical consequences of progressive marginal bone loss around oral implants: a finite element stress analysis
    Akca, Kivanc
    Cehreli, Murat Cavit
    [J]. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING, 2006, 44 (07) : 527 - 535
  • [2] Behr M, 2003, INT J PROSTHODONT, V16, P538
  • [3] Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns
    Bindl, A
    Lüthy, H
    Mörmann, WH
    [J]. DENTAL MATERIALS, 2006, 22 (01) : 29 - 36
  • [4] Bindl A, 2003, INT J PROSTHODONT, V16, P653
  • [5] Fatigue Resistance of 2 Different CAD/CAM Glass-Ceramic Materials Used for Single-Tooth Implant Crowns
    Cavusoglu, Yeliz
    Sahin, Erdal
    Gurbuz, Riza
    Akca, Kivanc
    [J]. IMPLANT DENTISTRY, 2011, 20 (05) : 374 - 378
  • [6] Çehreli MC, 2011, INT J PROSTHODONT, V24, P77
  • [7] Drago C, 2010, INT J ORAL MAX IMPL, V25, P920
  • [8] Fritzsche G, 2004, Int J Comput Dent, V7, P199
  • [9] Gougaloff R, 2010, J CALIF DENT ASSOC, V38, P176
  • [10] Gougaloff Robert, 2010, J Calif Dent Assoc, V38, P170
123