Adsorption Behaviour of Co(II) from Aqueous Solutions onto D113-III Resin

被引:1
作者
Jiang, Xinlong [1 ]
Yang, Liqun [2 ]
Yang, Qing [3 ]
Xiong, Chunhua [2 ]
Jiang, Jianxiong [4 ]
Jia, Qian [2 ]
Chen, Qing [2 ]
机构
[1] Zhejiang Shuren Univ, Coll Biol & Environm Engn, Hangzhou 310015, Zhejiang, Peoples R China
[2] Zhejiang Gongshang Univ, Dept Appl Chem, Hangzhou 310012, Zhejiang, Peoples R China
[3] Univ Minnesota, Dept Chem Engn, Duluth, MN 55812 USA
[4] Hangzhou Normal Univ, Key Lab Organosilicon Chem & Mat Technol, Minist Educ, Hangzhou 310036, Zhejiang, Peoples R China
基金
中国国家自然科学基金;
关键词
D113-III resin; Co(II); Adsorption; Thermodynamics; Adsorption isotherm; ATOMIC-ABSORPTION-SPECTROMETRY; SILICA-GEL; COBALT; COPPER(II); LEAD(II); RECOVERY; 8-HYDROXYQUINOLINE; PRECONCENTRATION; CADMIUM(II); SEPARATION;
D O I
10.14233/ajchem.2014.15627
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
In this study, the adsorption and desorption properties of Co(II) on D113:III resin have been studied. The different variables: affecting the adsorption capacity Such as pH of the solution; temperature and contact-time have been investigated, which indicate that D113-III resit could adsorb Co(l) effectively from aqueous solution. The results show that the optimal adsorption condition of D113-III resin for CO(II) is achieved at pH = 6.5. The maximum saturated adsorption Capacity of CO(II) is 192.1 mg.g(-1) D113-III resin rat 298 K. The thermodynamic parameters such as Delta G degrees which were all negative and Delta H degrees Which was positive, indicated that the adsorption of Co(II) ion onto D113-III resin was spontaneous and endothermic, respectively. Positive Delta S degrees value of Co(II) adsorption process indicates an irregular increase of the randomness at the D113-III resin-solution interface during adsorption. Adsorption isotherms correlated well with the Langmuir model. Experimental data were also evaluated to find out kinetic characteristics Of the adsorption process. Desorption: studies revealed that Co(II) ion could be eluted effectively by using the 0.25-1.0 mol L-1 HCl solution. Thomas Model was applied to experimental data to predict the breakthrough curves and to determine the characteristics parameters of the column Useful for process design.
引用
收藏
页码:2022 / 2026
页数:5
相关论文
共 30 条