Process adapted structure optimization of deep hole drilling tools

被引：31

作者：

Biermann, D. ^{[1
]}

Kersting, M. ^{[1
]}

Kessler, N. ^{[1
]}

机构：

[1] Tech Univ Dortmund, Inst Machining Technol, D-44227 Dortmund, Germany

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2009年 / 58卷 / 01期

关键词：

Deep hole drilling; Finite element method (FEM); Cutting tool development;

D O I：

10.1016/j.cirp.2009.03.102

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In order to machine boreholes having a high length-to-diameter ratio, deep hole drilling methods are applied. Especially when drilling ductile materials, the removal of cooling lubricant and chips can be hindered by long chips which block the inside of the chip mouth. In order to increase the volume flow rate of the cooling lubricant and chips, the chip mouth cross-section of a commercially available state-of-the art BTA (Boring and Trepanning Association) boring tool was analyzed. Structure topology optimization was applied to reduce the drill head material without the drill head losing its stiffness to maximize the chip mouth cross-section. Finally, new drill head design was developed and verified through experimental investigations. (C) 2009 CIRP.

引用

页码：89 / 92

页数：4