Co-PP/EPDM Blend Optimization Using D-Optimal Design for Medical Applications

被引：3
作者：
Balaji, Anand Bellam [1 ]
Khalid, Mohammad [1 ]
Ratnam, Chantara Thevy [2 ]
Michael, Feven Mattews [1 ]
Walvekar, Rashmi [3 ]
机构：
[1] Univ Nottingham, Fac Engn, Dept Chem & Environm Engn, Malaysia Campus,Jalan Broga, Semenyih, Selangor, Malaysia
[2] Agensi Nuklear Malaysia, Radiat Proc Technol Div, Bangi, Selangor, Malaysia
[3] Taylors Univ, Energy Res Div, Subang Jaya, Selangor, Malaysia
来源：
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2017年 / 56卷 / 02期
关键词：
Co-PP; D-optimal; EPDM; mechanical properties; optimization; POLYPROPYLENE; CRYSTALLIZATION; RUBBER;
D O I：
10.1080/03602559.2016.1211695
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
This work focuses on the optimization and identification of blend with balanced mechanical properties of Co-PP/EPDM. The blending factors include time, temperature, screw speed, and blend ratio. Tensile strength and elongation at break were studied as the two responses. D-Optimal model was used to fit the regression line, which was validated using analysis of variance and "lack of fit" test. An average error of 10% (for tensile strength) and 3.2% (for elongation at break) was observed between the actual and predicted values. Further, the thermal stability, dynamic mechanical analysis, and phase morphology of the optimized blend were also investigated. [GRAPHICS] .
引用
收藏
页码：216 / 226
页数：11
相关论文
共 50 条
  • [41] Multiscale modelling of porous polymers using a combined finite element and D-optimal design of experiment approach
    Spaggiari, Andrea
    O'Dowd, Noel
    Dragoni, Eugenio
    COMPUTATIONAL MATERIALS SCIENCE, 2011, 50 (09) : 2671 - 2682
  • [42] A New Practical Route to ZSM-5 Nanoparticles and Optimization of Synthetic Parameters through D-optimal Design of Experiments
    Soltanali, Saeed
    Halladj, Rouein
    Rashidi, Alimorad
    Bazmi, Mansour
    Khodabakhshi, Saeed
    JOURNAL OF THE CHINESE CHEMICAL SOCIETY, 2015, 62 (09) : 817 - 825
  • [43] Development of Grain-Based Protein Rich Extruded Snack Foods Using D-Optimal Mixture Design
    Mangaraj, Shukadev
    Nishad, Praween
    Thakur, Rajeev Ranjan
    Deshpande, Sumedha
    Sami, Rokayya
    Aljahani, Amani H.
    Alzahrani, Fatimah
    Almutairi, Khalid
    Helal, Mahmoud
    JOURNAL OF BIOBASED MATERIALS AND BIOENERGY, 2023, 17 (01) : 93 - 104
  • [44] "Real-time" disintegration analysis and D-optimal experimental design for the optimization of diclofenac sodium fast-dissolving films
    El-Malah, Yasser
    Nazzal, Sami
    PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY, 2013, 18 (06) : 1355 - 1360
  • [45] Optimization of blending ratios of wheat-maize-sprouted mungbean (Vigna radiata L.) composite flour bread using D-optimal mixture design
    Manyatsi, Nkosephayo T.
    Solomon, W. K.
    Shelembe, J. S.
    COGENT FOOD & AGRICULTURE, 2020, 6 (01):
  • [46] Effect of using riceberry flour and xanthan gum on physical properties and estimated glycemic index of steamed rice cakes: optimization by D-optimal mixture design approach
    Natcha Laokuldilok
    Siriluck Surin
    Nanthina Damrongwattanakool
    Journal of Food Science and Technology, 2022, 59 : 724 - 734
  • [47] Design and Development of Docetaxel Solid Self-Microemulsifying Drug Delivery System Using Principal Component Analysis and D-Optimal Design
    Bhattacharya, Sankha
    Mishra, Shivangee
    Prajapati, Bhupendra G.
    ASIAN JOURNAL OF PHARMACEUTICS, 2018, 12 (01) : S122 - S144
  • [48] Effect of using riceberry flour and xanthan gum on physical properties and estimated glycemic index of steamed rice cakes: optimization by D-optimal mixture design approach
    Laokuldilok, Natcha
    Surin, Siriluck
    Damrongwattanakool, Nanthina
    JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 2022, 59 (02): : 724 - 734
  • [49] Process optimization of solvent extraction of seed oil from Moringa oleifera: An appraisal of quantitative and qualitative process variables on oil quality using D-optimal design
    Oladipo, Babatunde
    Betiku, Eriola
    BIOCATALYSIS AND AGRICULTURAL BIOTECHNOLOGY, 2019, 20
  • [50] Formulation and Hardness Evaluation of Tablets Containing Citrus limon and Hylocereus polyrhizus Powder using D-Optimal Mixture Design
    Abd Manan, Ezzah
    Abd Gani, Siti Salwa
    Zaidan, Uswatun Hasanah
    Halmi, Mohd Izuan Effendi
    SAINS MALAYSIANA, 2022, 51 (10): : 3347 - 3357
12345