Co-PP/EPDM Blend Optimization Using D-Optimal Design for Medical Applications

被引：3

作者：

Balaji, Anand Bellam ^{[1
]}

Khalid, Mohammad ^{[1
]}

Ratnam, Chantara Thevy ^{[2
]}

Michael, Feven Mattews ^{[1
]}

Walvekar, Rashmi ^{[3
]}

机构：

[1] Univ Nottingham, Fac Engn, Dept Chem & Environm Engn, Malaysia Campus,Jalan Broga, Semenyih, Selangor, Malaysia

[2] Agensi Nuklear Malaysia, Radiat Proc Technol Div, Bangi, Selangor, Malaysia

[3] Taylors Univ, Energy Res Div, Subang Jaya, Selangor, Malaysia

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2017年 / 56卷 / 02期

关键词：

Co-PP; D-optimal; EPDM; mechanical properties; optimization; POLYPROPYLENE; CRYSTALLIZATION; RUBBER;

D O I：

10.1080/03602559.2016.1211695

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

This work focuses on the optimization and identification of blend with balanced mechanical properties of Co-PP/EPDM. The blending factors include time, temperature, screw speed, and blend ratio. Tensile strength and elongation at break were studied as the two responses. D-Optimal model was used to fit the regression line, which was validated using analysis of variance and "lack of fit" test. An average error of 10% (for tensile strength) and 3.2% (for elongation at break) was observed between the actual and predicted values. Further, the thermal stability, dynamic mechanical analysis, and phase morphology of the optimized blend were also investigated. [GRAPHICS] .

引用

页码：216 / 226

页数：11

共 50 条

[31] Quantitative and qualitative optimization of allergen extraction from peanut and selected tree nuts. Part 1. Screening of optimal extraction conditions using a D-optimal experimental design
L'Hocine, Lamia
Pitre, Melanie
FOOD CHEMISTRY, 2016, 194 : 780 - 786
[32] Effect of African Catfish Mucilage Concentration on Stability of Nanoemulsion Using D-Optimal Mixture Design
Oluwole, Adebanji Olasupo
Ikhu-Omoregbe, Daniel Imwansi
Jideani, Victoria Adaora
Ntwampe, Seteno Karabo
APPLIED SCIENCES-BASEL, 2021, 11 (15):
[33] Modeling and analysis of performances in drilling hybrid metal matrix composites using D-optimal design
Rajmohan, T.
Palanikumar, K.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 64 (9-12) : 1249 - 1261
[34] Molecular identification of potential denitrifying bacteria and use of D-optimal mixture experimental design for the optimization of denitrification process
Ben Taheur, Fadia
Fdhila, Kais
Elabed, Hamouda
Bouguerra, Amel
Kouidhi, Bochra
Bakhrouf, Amina
Chaieb, Kamel
MICROBIAL PATHOGENESIS, 2016, 93 : 158 - 165
[35] Modeling the Effect of Composition on Formation of Aerosolized Nanoemulsion System Encapsulating Docetaxel and Curcumin Using D-Optimal Mixture Experimental Design
Asmawi, Azren Aida
Salim, Norazlinaliza
Abdulmalek, Emilia
Rahman, Mohd Basyaruddin Abdul
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2020, 21 (12) : 1 - 17
[36] Coagulation/flocculation process using Moringa oleifera bio-coagulant for industrial paint wastewater treatment: optimization by D-optimal experimental design
F. Madjene
O. Benhabiles
A. Boutra
M. Benchaib
I. Bouchakour
International Journal of Environmental Science and Technology, 2023, 20 : 12131 - 12140
[37] Valorisation of pumpkin seeds through wheat-sorghum-pumpkin seed composite flour muffins: optimization using D-optimal mixture design
Mdluli, Hlengiwe
Kidane, Solomon W.
Nkambule, T. P.
Shelembe, J. S.
COGENT FOOD & AGRICULTURE, 2024, 10 (01):
[38] Development of whey-fruit-based energy drink mixes using D-optimal mixture design
Shiby, Varghese Kochupurakkal
Radhakrishna, Kolpe
Bawa, Amarinder Singh
INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY, 2013, 48 (04) : 742 - 748
[39] Coagulation/flocculation process using Moringa oleifera bio-coagulant for industrial paint wastewater treatment: optimization by D-optimal experimental design
Madjene, F.
Benhabiles, O.
Boutra, A.
Benchaib, M.
Bouchakour, I.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 2023, 20 (11) : 12131 - 12140
[40] Optimization of Mechanical Characteristics of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites via D-Optimal Mixture Design
Lin, Show-Shyan
Lin, Jen-Chang
Yang, Yung-Kuang
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (02) : 195 - 203

← 1 2 3 4 5 →