Optimization of Process Parameters of Fracture Toughness Using Simulation Technique Considering Aluminum-Graphite Composites

被引:17
作者
Begum, Yasmin [1 ]
Bharath, K. N. [1 ]
Doddamani, Saleemsab [2 ]
Rajesh, A. M. [3 ]
Kaleemulla, K. Mohamed [4 ]
机构
[1] VTU Belagavi, Dept Mech Engn, GM Inst Technol, Davangere, India
[2] VTU Belagavi, Dept Mech Engn, Jain Inst Technol, Davangere, India
[3] VTU Belagavi, Dept Mech Engn, SJM Inst Technol, Davangere, India
[4] VTU Belagavi, Dept Mech Engn, U BDT Coll Engn, Davangere, India
关键词
ANSYS simulation; Fracture toughness; Taguchi’ s DOE; ANOVA; Regression analysis; FATIGUE-CRACK GROWTH; BEHAVIOR;
D O I
10.1007/s12666-020-02113-5
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The main objective of this work is to optimize the process parameters of fracture toughness such as composition of the material, a/W ratio and testing methods using the simulation technique using ANSYS tool. The material used here is the aluminum-graphite composite of the composition 6, 9 and 12 wt% of the reinforcement. The design of experiments parameters considered is testing methods, a/W ratios and composition of the composite. All the three parameters and factors are put into Taguchi's L9 orthogonal array for analysis. The three dimensional modeling is done using the ANSYS software for simulation. The outcomes of the simulation are used to analyze process parameters. From the analysis, it is observed that the fracture toughness of the material is mainly influenced by the composition and a/W ratio, whereas the testing methods will have a least effect. The experimental, simulation and statistical results of fracture toughness agree with each other.
引用
收藏
页码:3095 / 3103
页数:9
相关论文
共 26 条
[1]   Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)-silicon carbide particulate composites [J].
Alaneme, K. K. ;
Aluko, A. O. .
SCIENTIA IRANICA, 2012, 19 (04) :992-996
[2]  
Anderson TL, 2013, FRACTURE MECH FUNDAM, P3
[3]  
[Anonymous], 2017, STAND TEST METH PLAN
[4]  
Begum Y, 2015, INT J ENG RES TECHNO, P19
[5]  
Behal J, 2012, 20 SVSFEM ANSYS US G, P1
[6]  
Chandwani R, 2004, UK ANSYS C ZENT INT
[7]  
Dhummansure V, 2020, STRUCT INTEGR LIFE, V20, P51
[8]   Fracture Toughness Testing of 6061Al–Graphite Composites Using SENB Specimens [J].
Doddamani S. ;
Kiran J.O. ;
Kaleemulla M. ;
Bakkappa B. .
Journal of The Institution of Engineers (India): Series D, 2019, 100 (02) :195-201
[9]  
Doddamani S, 2019, MECH ADV COMPOSITE S
[10]  
Doddamani S, 2019, J SOLID MECH