Microstructure and wear resistance of ZrC reinforced Metal matrix composite coating by gas tungsten arc cladding

被引：1

作者：

Wang, Zhenting ^{[1
,2
]}

Fan, Jingxin ^{[2
]}

机构：

[1] Jiangsu Key Lab Large Engn Equipment Detect & Con, Xuzhou 221111, Peoples R China

[2] Heilongjiang Inst Sci & Technol, Coll Mat Sci & Engn, Harbin 150027, Peoples R China

来源：

ADVANCED ENGINEERING MATERIALS III, PTS 1-3 | 2013年 / 750-752卷

关键词：

gas tungsten arc cladding; In situ synthesis; ZrC; Microstructure; Wear resistance;

D O I：

10.4028/www.scientific.net/AMR.750-752.2113

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The in situ synthesized ZrC particulate reinforced metal matrix composite coating was fabricated on AISI1020 steel by gas tungsten arc (GTA) cladding powder mixture of Nickel, Zirconium and Graphite. The microstructure and wear resistance of the composite coating were investigated. It is shown that the coating is bonded metallurgically to the substrate and has a homogeneous fine microstructure containing both approximate cubic ZrC particle uniformly dispersed in matrix of (Fe,Ni) solid solution. Compared to a substruate, the hardness of the composite coating was increased by a factor of 6, could achieve a Vicker microhardness of HV(0.2)1100. And the wear resistance in a block on ring test against YG8 was increased by a factor of 10. This is attributed to the presence of in situ synthesized ZrC particles and their well distribution in the coating.

引用

页码：2113 / +

页数：2

共 5 条

[1] In situ synthesis of SiC reinforced MMC surface on AISI 304 stainless steel by TIG surface alloying [J].

Buytoz, S ;

Ulutan, M .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (12-13) :3698-3704

[2] Dry sliding wear behavior of TIG welding clad WC composite coatings [J].

Buytoz, S ;

Ulutan, M ;

Yildirim, MM .

APPLIED SURFACE SCIENCE, 2005, 252 (05) :1313-1323

[3] MA-SHS and SPS of ZrB2-ZrC composites [J].

Tsuchida, T ;

Yamamoto, S .

SOLID STATE IONICS, 2004, 172 (1-4) :215-216

[4] Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting process [J].

Wang, X. H. ;

Song, S. L. ;

Qu, S. Y. ;

Zou, Z. D. .

SURFACE & COATINGS TECHNOLOGY, 2007, 201 (12) :5899-5905

[5] Microstructure and formation mechanism of in-situ TiC-TiB2/Fe composite coating [J].

Wang Zhen-ting ;

Zhou Xiao-hui ;

Zhao Guo-gang .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2008, 18 (04) :831-835

← 1 →