Comparative Studies on Microstructure, Mechanical and Pitting Corrosion of Post Weld Heat Treated IN718 Superalloy GTA and EB Welds

被引:0
作者
Dilkush [1 ]
Mohammed, Raffi [2 ]
Reddy, G. Madhusudhan [4 ]
Rao, K. Srinivasa [3 ]
机构
[1] RGUKT, Dept Met & Mat Engn, Nuzvid, India
[2] NIT Andhra Pradesh, Dept Met & Mat Engn, Tadepalligudem, Andhra Pradesh, India
[3] Andhra Univ, Dept Met Engn, Visakhapatnam, Andhra Pradesh, India
[4] Def Met Res Lab, Hyderabad, Telangana, India
来源
INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MECHANICAL AND CIVIL ENGINEERING | 2018年 / 330卷
关键词
PRECIPITATION; CRACKING; SOLIDIFICATION; BEHAVIOR;
D O I
10.1088/1757-899X/330/1/012051
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In the present study, an attempt has been made to weld Inconel 718 nickel-base superalloy (IN718 alloy) using gas tungsten arc welding (GTAW) and electron beam welding (EBW) processes. Both the weldments were subjected to post-weld heat treatment condition as follows -980(0)C /20 min followed by direct aging condition (DA) as 720(0)C/8 h/FC followed by 620(0)C /8 h/AC. The GTA and EB welds of IN718 alloy were compared in two conditions as-received and 980STA conditions. Welds were characterized to observe mechanical properties, pitting corrosion resistance by correlating with observed microstructures. The rate of higher cooling ranges, the fusion zone of EBW exhibited discrete and relative finer lave phases whereas the higher niobium existed laves with coarser structure were observed in GTAW. The significant dissolution of laves were observed at 980STA of EBW. Due to these effects, the EBW of IN718 alloy showed the higher mechanical properties than GTAW. The electrochemical potentiostatic etch test was carried out in 3.5wt% sodium chloride (NaCl) solution to study the pitting corrosion behaviour of the welds. Results of the present investigation established that mechanical properties and pitting corrosion behaviour are significantly better in post weld heat treated condition. The comparative studies showed that the better combination of mechanical properties and pitting corrosion resistance were obtained in 980STA condition of EBW than GTAW.
引用
收藏
页数:12
相关论文
共 28 条
[21]   Effects of post-weld heat treatments on the microstructure, mechanical and corrosion properties of gas metal arc welded 304 stainless steel [J].
Abioye, Taiwo Ebenezer ;
Omotehinse, Igbekele Samson ;
Oladele, Isiaka Oluwole ;
Olugbade, Temitope Olumide ;
Ogedengbe, Tunde Isaac .
WORLD JOURNAL OF ENGINEERING, 2020, 17 (01) :87-96
[22]   Analysis of Microstructure and Mechanical Properties in As-Built/As-Cast and Heat-Treated Conditions for IN718 Alloy Obtained by Selective Laser Melting and Investment Casting Processes [J].
Carlos Pereira, Juan ;
Aranzabe, Jon ;
Carmen Taboada, Mari ;
Ruiz, Noelia ;
Pablo Rodriguez, Pedro .
CRYSTALS, 2021, 11 (10)
[23]   Effect of a brief post-weld heat treatment on the microstructure evolution and pitting corrosion of laser beam welded UNS S31803 duplex stainless steel [J].
Yang, Yanze ;
Wang, Zhiyu ;
Tan, Hua ;
Hong, Jufeng ;
Jiang, Yiming ;
Jiang, Laizhu ;
Li, Jin .
CORROSION SCIENCE, 2012, 65 :472-480
[24]   High-performance Ni-based superalloy 718 fabricated via arc plasma directed energy deposition: effect of post-deposition heat treatments on microstructure and mechanical properties [J].
Farias, Francisco Werley Cipriano ;
Duarte, Valdemar R. ;
Payao Filho, Joao da Cruz ;
Figueiredo, Arthur Ribeiro ;
Schell, Norbert ;
Maawad, Emad ;
Li, J. Y. ;
Zhang, Y. ;
Bordas-Czaplicki, Melanie ;
da Fonseca, Fabio Machado Alves ;
Cormier, Jonathan ;
Santos, Telmo G. ;
Oliveira, J. P. .
ADDITIVE MANUFACTURING, 2024, 88
[25]   Structure-property relationships of PCGTA welds of Inconel X750 in as-welded and post-weld heat treated conditions-A comparative study [J].
Ramkumar, K. Devendranath ;
Krishnan, S. Rahul ;
Ramanand, R. ;
Logesh, S. ;
Satyandas, Tushar ;
Ameer, Ajmal ;
Arivazhagan, N. .
JOURNAL OF MANUFACTURING PROCESSES, 2015, 20 :1-14
[26]   Research on the microstructure, mechanical and fatigue performance of 7075/6061 dissimilar aluminum alloy fusion welding joint treated by nanoparticle and post-weld heat treatment [J].
Zhang, Baijun ;
Zhang, Yongkang ;
Zheng, Kangsheng ;
Chi, Yuanqing .
ENGINEERING FRACTURE MECHANICS, 2024, 311
[27]   The Effect of Post Weld Heat Treatment (PWHT) on the Microstructure, Microhardness and Sulphide Stress Corrosion Cracking (SSCC) of Ni-Base Superalloy IN625 Hot Wire TIG Cladding on AISI 4130 Steel [J].
Sedighi, M. ;
Shajari, Y. ;
Razavi, S. H. ;
Sabet, H. ;
Porhonar, M. .
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2021, 57 (01) :113-120
[28]   Characterization of Microstructure and Mechanical Properties of Friction Stir Welded Reduced Activation Ferritic-Martensitic Steel in As-Received, As-Welded and Post-weld Heat-Treated States [J].
Varghese, Johny ;
Rajulapati, Koteswararao V. ;
Rao, K. Bhanu Sankara ;
Akash, N. Chavan ;
Meshram, S. D. ;
Reddy, G. Madhusudhan .
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2022, 75 (10) :2581-2594