Kmax effects on the near-threshold fatigue crack growth of powder-metallurgy aluminum alloys

被引：3

作者：

Newman, John A. ^{[1
]}

Smith, Stephen W. ^{[1
]}

Piascik, Robert S. ^{[2
]}

机构：

[1] NASA, Langley Res Ctr, Durabil Damage Tolerance & Reliabil Branch, Hampton, VA 23681 USA

[2] NASA, Engn & Safety Ctr, Hampton, VA 23681 USA

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2009年 / 31卷 / 8-9期

关键词：

Fatigue crack growth; Threshold; K-max; Fine-grain; Aluminum alloys; Room-temperature creep; AL-MG ALLOY; NANOCRYSTALLINE MATERIALS; DEFORMATION MECHANISM; SUPERPLASTIC BEHAVIOR; COMPUTER-SIMULATION; GRAIN-REFINEMENT; MAGNESIUM ALLOY; CREEP-BEHAVIOR; COPPER BARS; STRAIN-RATE;

D O I：

10.1016/j.ijfatigue.2009.01.002

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Fatigue crack growth (FCG) research conducted in the near-threshold regime has identified a room-temperature creep crack growth damage mechanism for a fine-grain powder-metallurgy aluminum alloy (8009). At very low Delta K, an abrupt acceleration in room-temperature FCG rate occurs at high stress ratio and is exacerbated by increased levels of K-max (K-max >= 0.4K(Ic)). Detailed crack-surface analysis correlates accelerated FCG with the formation of crack-tip process zone micro-void damage. Experimental results show that the near-threshold and K-max influenced accelerated crack growth is time and temperature dependent. (C) 2009 Published by Elsevier Ltd.

引用

页码：1237 / 1245

页数：9

共 50 条

[31] Near threshold fatigue crack growth versus long finite life
Paris, PC
Tada, H
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2002, 25 (8-9) : 727 - 733
[32] Fatigue Crack Initiation and Growth of Aluminum Alloy with Stress Ratio Effects
Haftirman, Idrus
Afendi, M.
Hoe, Wong Chun
ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II, 2014, 594-595 : 1105 - 1111
[33] Near-threshold crack extension mechanisms in an aluminum alloy studied by SEM and X-ray tomography
Wicke, M.
Brueckner-Foit, A.
Kirsten, T.
Zimmermann, M.
Buelbuel, F.
Christ, H. -J.
INTERNATIONAL JOURNAL OF FATIGUE, 2019, 119 : 102 - 111
[34] Corrosion fatigue crack growth model for aluminum alloys in jet fuel
Liu, Zuoting
Liu, Shilong
Cao, Jing
Pan, Yang
Yao, Weixing
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (12) : 4432 - 4449
[35] FATIGUE SURFACE CRACK GROWTH IN ALUMINUM ALLOYS UNDER DIFFERENT TEMPERATURES
Yarullin, R.
Ishtyryakov, I.
XVIII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM XVIII), 2016, 160 : 199 - 206
[36] Near-threshold fatigue crack growth properties of wrought magnesium alloy AZ61 in ambient air, dry air, and vacuum
Karr, U.
Schoenbauer, B. M.
Mayer, H.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (09) : 1938 - 1947
[37] Effect of sigma phase on near-threshold fatigue crack growth behavior and ultrasonic evaluation in AISI 316L stainless steel
Bumjoon Kim
Jonghoon Lee
Jiwoo Im
Jongbum Kim
Moonki Kim
Hakjoon Kim
Sungjin Song
Byeongsoo Lim
Journal of Mechanical Science and Technology, 2012, 26 : 3091 - 3096
[38] Effect of sigma phase on near-threshold fatigue crack growth behavior and ultrasonic evaluation in AISI 316L stainless steel
Kim, Bumjoon
Lee, Jonghoon
Im, Jiwoo
Kim, Jongbum
Kim, Moonki
Kim, Hakjoon
Song, Sungjin
Lim, Byeongsoo
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (10) : 3091 - 3096
[39] Predicting the effects of load ratio on the fatigue crack growth rate and fatigue threshold
Kardomateas, GA
Carlson, RL
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1998, 21 (04) : 411 - 423
[40] Analyses of fatigue crack growth and closure near threshold conditions for large-crack behavior
Newman, JC
FATIGUE CRACK GROWTH THRESHOLDS, ENDURANCE LIMITS, AND DESIGN, 2000, 1372 : 227 - 251

← 1 2 3 4 5 →